GTcarz - Automotive forums for cars & trucks.

GTcarz - Automotive forums for cars & trucks. (https://www.gtcarz.com/)
-   Hyundai Mailing List (https://www.gtcarz.com/hyundai-mailing-list-137/)
-   -   hyundai excel 1993 running rich (https://www.gtcarz.com/hyundai-mailing-list-137/hyundai-excel-1993-running-rich-50162/)

Norman Webb 11-08-2004 04:33 AM

hyundai excel 1993 running rich
 
I've just put a recon motor in my hyundai excel 1993.
It is a dual fuel and runs ok on lpg but on petrol runs very rich.

If when accelerating I just back of throttle it will run clean but the
slightest increase in throttle causes lots of black smoke.

A local auto repairer is looking at it.

We have swapped oxygen sensor, throttle position, MAP sensor, checked temp
sensor and still no go.

Error code showed oxygen sensor error but suspect this was because it was
running so rich.

Could only check output fuel pressure from fule return but seemed ok.

Any ideas for further check

Regards

Norman Webb



Norman Webb 11-10-2004 08:36 PM

Re: hyundai excel 1993 running rich
 
Being overwhelmed by the response I did more swapping.

plugged in another injector rail and injectors and away she went.




Norman Webb wrote in message
<418f3b42$0$6540$5a62ac22@per-qv1-newsreader-01.iinet.net.au>...
>I've just put a recon motor in my hyundai excel 1993.
>It is a dual fuel and runs ok on lpg but on petrol runs very rich.
>
>If when accelerating I just back of throttle it will run clean but the
>slightest increase in throttle causes lots of black smoke.
>
>A local auto repairer is looking at it.
>
>We have swapped oxygen sensor, throttle position, MAP sensor, checked temp
>sensor and still no go.
>
>Error code showed oxygen sensor error but suspect this was because it was
>running so rich.
>
>Could only check output fuel pressure from fule return but seemed ok.
>
>Any ideas for further check
>
>Regards
>
>Norman Webb
>
>





All times are GMT -4. The time now is 09:33 PM.


© 2024 MH Sub I, LLC dba Internet Brands

Page generated in 0.03549 seconds with 5 queries