GTcarz - Automotive forums for cars & trucks.

GTcarz - Automotive forums for cars & trucks. (https://www.gtcarz.com/)
-   Hyundai Mailing List (https://www.gtcarz.com/hyundai-mailing-list-137/)
-   -   ICV Valve (https://www.gtcarz.com/hyundai-mailing-list-137/icv-valve-50907/)

FCW 07-05-2005 05:40 PM

ICV Valve
 
Hi!

Posted a question a couple of days ago, about Oil consumption in my Accent.

Someone mentioned a defect ICV valve could be one of the causes of excess
oil burning.
Is there any possible thing I could do to check this valve, if it's OK or
not?

Btw...when looking under the hood at idle, I noticed a relatively loud
hizzing noise (like something is leaking air) around the
carburettor...thing.
When revving up, it diminishes a bit. Normal or what?

Thanx
FC



FCW 07-05-2005 05:46 PM

Re: ICV Valve
 
Forgot to mention....driving Accent 1,5 -96 mod.

FC



hyundaitech 07-05-2005 06:26 PM

Re: ICV Valve
 
Jody mentioned the PCV valve. Is this what you mean?

The PCV valve screws into the valve cover and has a hose leading from it
to the intake manifold. It's purpose is to remove pressurized vapors from
the crankcase while the manifold sucks them into the engine with new air to
be combusted with the air fuel mixture. There's also a breather hose which
runs from the air intake hose to the valve cover which allows fresh air to
be sucked into the crankcase. If this system does not operate properly,
it can cause excessive crankcase pressure, and encourage leaks and
excessive oil consumption.

You'll want to check the PCV hose, breather hose, and PCV valve itself.
Check the breather hose to verify it's not kinked or clogged. Check the
PCV hose to be sure it's not kinked or clogged, has no leaks, and that it
does not suck shut when the engine is running. To check the PCV valve,
you should check to make sure air can be sucked in the direction of the
intake manifold, but not back into the engine crankcase.



FCW 07-06-2005 03:33 AM

Re: ICV Valve
 

"hyundaitech" <notpublic@not.public.com> skrev i melding
news:56f6a193be65fb52440a453e210e1f06@localhost.ta lkaboutautos.com...
> Jody mentioned the PCV valve. Is this what you mean?
>



Of course....PCV is what I mean :-)
FC



Brian Nystrom 07-06-2005 07:08 AM

Re: ICV Valve
 
FCW wrote:
> Hi!
>
> Posted a question a couple of days ago, about Oil consumption in my Accent.
>
> Someone mentioned a defect ICV valve could be one of the causes of excess
> oil burning.
> Is there any possible thing I could do to check this valve, if it's OK or
> not?
>
> Btw...when looking under the hood at idle, I noticed a relatively loud
> hizzing noise (like something is leaking air) around the
> carburettor...thing.
> When revving up, it diminishes a bit. Normal or what?


In addition to checking the PCV/breather system, check to see that all
the hoses under the hood are connected to something and are not damaged.
The hissing you hear could be a vacuum hose that's broken or disconnected.


All times are GMT -4. The time now is 10:25 AM.


© 2024 MH Sub I, LLC dba Internet Brands

Page generated in 0.06438 seconds with 5 queries