no start 92 hyundai excell
i am working on a car that has spark and i assume fuel but will not start,
i changed the fuel pump under the impression it was bad and no result its a customer car , is there anythone that can help in my problem? |
Re: no start 92 hyundai excell
Are the injectors pulsing? Do you have fuel pressure? Is it cranking very
fast like no compression? |
Re: no start 92 hyundai excell
i have fuel psi, the injectors are not pulsing so says my quick test probe
and it is cranking fast, but the t belt is ok and the timing markes line up |
Re: no start 92 hyundai excell
i do not have injector pulse and was told to change the ing module, it did
not start the car. it is cranking fast, i have no juice at the crank angle sensor which is in side the dis assembly, the com is excepting the scantool so i can communicate with it , so the com must be working? if the pickup module wich is replaceable in the dis, was bad wouldnt there be no spark? i have spark! |
Re: no start 92 hyundai excell
The distributor has a crank and cam sensor. Depending on which fails and
how, I could foresee spark but no pulse. Keep in mind that the car doesn't need to know which cylinder is firing for spark, the distributor does that manually. How does the engine oil look? I've seen sludged engines seize camshafts so that the dowel on the end of the camshaft broke off and the sprocket turned on the camshaft. I've also seen damaged crank sprockets that are worn on the flats that go against the crankshaft. Either of these conditions will look like the engine is in time because the sprockets are lined up, but the cam or crank may itself be out of position. |
Re: no start 92 hyundai excell
ok thanks for your advice, we r getting a used dis tomorow, and i hope that
will fix our problem. i was told that else were and it is our next step, would severe engine damage occure with only 80 k on the speedo |
All times are GMT -4. The time now is 10:39 AM. |
© 2024 MH Sub I, LLC dba Internet Brands