Power locks not working on Accent 2001
 

My 2001 Accent has a dealer installed AutoMate Security System. For
some unknown reason, the power locks only work for the driver's door.
The passenger door and hatch locks only work manually. Also when
disarming the system, I hear five chirps instead of the usual two.

What's going on?

Re: Power locks not working on Accent 2001
 

the accent from the factory does not have a poer door lock motor in the
drivers door.
It does have a switch built into the lock switch. so when you lock/unlock
the drivers door the others follow.

The alarm is activating a motor for the lock in the drivers door they
indtalled.
It appears the HYN remaining power lock system is not working.

the 5 chirps could be the alarm was set off, or has a bad sensor.

2 unrelated items

"accent" <accent@home.com> wrote in message
news:8j2en01kv87sf41sd48bei6kf5uetnkln5@4ax.com...
> My 2001 Accent has a dealer installed AutoMate Security System. For
> some unknown reason, the power locks only work for the driver's door.
> The passenger door and hatch locks only work manually. Also when
> disarming the system, I hear five chirps instead of the usual two.
>
> What's going on?

Re: Power locks not working on Accent 2001
 

Check the users manual for your alarm first. It should explain what the
five chirps mean.

Re: Power locks not working on Accent 2001
 

On Thu, 21 Oct 2004 12:23:48 -0400, "hyundaitech"
<notpublic@not.public.com> wrote:

>Check the users manual for your alarm first. It should explain what the
>five chirps mean.

I did look at the users manual and it still does not make any sense.
Five chirps when disarming means a breach of a zone occured. A
flashing led indicates which zone. Putting the key in the ignition is
supposed to reset the memory but I always get 5 chirps whenever I
press disarm on the remote.

Re: Power locks not working on Accent 2001
 

It sounds to me like your alarm system, for whatever reason, thinks a
door/hatch/hood/trunk lid is not closed. You should probably start by
checking these switches.

Re: Power locks not working on Accent 2001
 

On Fri, 22 Oct 2004 16:35:25 -0400, "hyundaitech"
<notpublic@not.public.com> wrote:

>It sounds to me like your alarm system, for whatever reason, thinks a
>door/hatch/hood/trunk lid is not closed. You should probably start by
>checking these switches.

Forget about the chirping alarm. It is a bit of a red herring. I need
to fix the passenger door lock and hatch lock. These do nothing when I
use the remote. I am told that the aftermarket part is only installed
on the driver side door and then the system ties into the factory
components in the passenger door lock and hatch lock.

How do I troubleshoot the factory components?

Re: Power locks not working on Accent 2001
 

There's apparently two different systems depending on whether your car has
the electronic time and alarm control system. Check out the schematics at
www.hmaservice.com. Select your vehicle and then click the "ETM" tab and
look at the power locks schematic.

Don't dismiss the alarm so easily. If the alarm is getting info from the
door/hatch switches already factory in the vehicle, the same thing could
be preventing the door locks from properly operating. For example, I
believe your vehicle is equipped with a feature that will not allow the
doors to be locked if a door is open and the key is in the ignition. Not
knowing what your remote entry is hooked to, it is difficult to know
whether the two items are related or not.

Re: Power locks not working on Accent 2001
 

On Sat, 23 Oct 2004 12:49:31 -0400, "hyundaitech"
<notpublic@not.public.com> wrote:

>There's apparently two different systems depending on whether your car has
>the electronic time and alarm control system. Check out the schematics at
>www.hmaservice.com. Select your vehicle and then click the "ETM" tab and
>look at the power locks schematic.
>
>Don't dismiss the alarm so easily. If the alarm is getting info from the
>door/hatch switches already factory in the vehicle, the same thing could
>be preventing the door locks from properly operating. For example, I
>believe your vehicle is equipped with a feature that will not allow the
>doors to be locked if a door is open and the key is in the ignition. Not
>knowing what your remote entry is hooked to, it is difficult to know
>whether the two items are related or not.

The chirping can be explained. It happens when the alarm is triggered
by opening the passenger door or hatch. This is normal.

I have the schematics and the location of the ETACM but I was hoping
for some layman type of troubleshooting guide.

It looks like my car will have to go back to the dealer for service.
Two aftermarket installers (including the one that did the original
job) had a look at my car. They were of the opinion that my problem
has more to do with Hyundai than the aftermarket unit. Both
technicians suggested that it is likely to be a corroded wire in the
door hinge area because it is a common occurrence.

Re: Power locks not working on Accent 2001
 

The wiring corrosion is not a frequent issue on Accents. To my knowledge
it occurs on 01-03 Elantras only (with reasonable frequency).