GTcarz - Automotive forums for cars & trucks.

GTcarz - Automotive forums for cars & trucks. (https://www.gtcarz.com/)
-   Hyundai Mailing List (https://www.gtcarz.com/hyundai-mailing-list-137/)
-   -   Taking out the fog lights and putting in grilles ? (attn:hyundaitech) (https://www.gtcarz.com/hyundai-mailing-list-137/taking-out-fog-lights-putting-grilles-attn-hyundaitech-51099/)

Dave in Lake Villa 08-28-2005 04:34 PM

Taking out the fog lights and putting in grilles ? (attn:hyundaitech)
 
I never use my fog lights , and, i saw a few other SantaFe's with
louvered grilles in place of the fog lights ; will this allow more cool
air into the engine bay ? If so, is it difficult to remove the fog
lights ? Im all for getting more air into the engine bay.

Thanks, Dave
2002 Santa Fe GLS.


enmicabesa@hotmail.com 08-29-2005 12:31 PM

(Attn. Dave in Lake Villa) (attn. Dave in Lake Villa) (Attn Dave in Lake Villa)
 

Dave in Lake Villa wrote:
> I never use my fog lights , and, i saw a few other SantaFe's with
> louvered grilles in place of the fog lights ; will this allow more cool
> air into the engine bay ? If so, is it difficult to remove the fog
> lights ? Im all for getting more air into the engine bay.
>
> Thanks, Dave
> 2002 Santa Fe GLS.



hyundaitech 08-29-2005 01:01 PM

Re: Taking out the fog lights and putting in grilles ? (attn:
 
This air will never reach the engine bay. Behind the fog lamps is the
inside of the fender well.


Dave in Lake Villa 08-30-2005 04:48 PM

Re: Taking out the fog lights and putting in grilles ? (attn:
 
But i could use flexible aluminum duct to get it into the engine bay.
Dont you think this would work good ?


hyundaitech 08-31-2005 01:20 PM

Re: Taking out the fog lights and putting in grilles ? (attn:
 
I doubt you'd get any benefit worth the effort. You'd have to cut holes
somewhere else to get the air into the engine bay or try to do some crazy
routing to get in in front of the radiator. The front bumper cover
actually comes off fairly easily if you want to nose around. Pull the
headlamps, remove the plastic retainers, several 10mm bolts underneath,
four screws underneath, and two at the bottom of the fenders.


Dave in Lake Villa 08-31-2005 03:31 PM

Re: Taking out the fog lights and putting in grilles ? (attn:
 
Ok..thanks. Ill have a peek .



All times are GMT -4. The time now is 01:16 PM.


© 2024 MH Sub I, LLC dba Internet Brands

Page generated in 0.05841 seconds with 5 queries