Rep Power: 0

Year 1986? Put a service Kit in the fuel tap what I now need to know is what pipe work should their be from the tap to the carbs ie 1,2,or 3 pipes attached to the tap going to the carbs no old pipe work on the bike & no manual. cheers for any help

 
Rep Power: 0

Here is the manual for the 1988 VT600, couldn't find your model but there's probably not much difference, good luckhttp://www.vt600.net/index.htm

 
Rep Power: 0

There was a single pipe leading from the petcock to a "T" piece.......a fuel pipe from each carb then joined the "T" sections and the pipe from the tank fitted onto the upright of the "T"The fittings on the carbs are about a 5mm bore or generally the biggest fitting on the carb. Just attach a short length of fuel pipe to each of these (2) and connect to a t piece ( available from Honda).