Re: accent won't start

Reply Subscribe

Thread Tools

Search this Thread

Jul 6, 2003 | 11:22 AM

nailgunner

Guest

Posts: n/a

Re: accent won't start

"nailgunner" <nailgunner@prodigy.net> wrote in message
news:96ANa.18$BI2.5954736@newssvr15.news.prodigy.c om...
> I have a 2000 accent 4cyl. that died the other day.....while in
> traffic........and would not restart.

Now have taken scan and code reads P0334 camshaft position sensor......Could
it have jumped time???

Thanks.................nailgunner

Jul 6, 2003 | 02:27 PM

R.G. Saunders

Guest

Posts: n/a

Re: accent won't start

From what I've seen in this group, that is not an uncommon failure.

"nailgunner" <nailgunner@prodigy.net> wrote in message
news:c9XNa.287$lX4.36@newssvr16.news.prodigy.com.. .
>
> "nailgunner" <nailgunner@prodigy.net> wrote in message
> news:96ANa.18$BI2.5954736@newssvr15.news.prodigy.c om...
> > I have a 2000 accent 4cyl. that died the other day.....while in
> > traffic........and would not restart.
>
> Now have taken scan and code reads P0334 camshaft position
sensor......Could
> it have jumped time???
>
> Thanks.................nailgunner
>
>

Jul 6, 2003 | 04:27 PM

Josh Drury

Guest

Posts: n/a

Re: accent won't start

> ...Could
> it have jumped time???

That depends... Have you installed a flux capacitor, and been driving at
over 88 MPH?

Jul 6, 2003 | 04:54 PM

Neil J. Hubbard

Guest

Posts: n/a

Re: accent won't start

"Josh Drury" <joshdrury@shaw.ca> wrote in message
news:qC%Na.372468$ro6.9040145@news2.calgary.shaw.c a...
> > ...Could
> > it have jumped time???
>
> That depends... Have you installed a flux capacitor, and been driving at
> over 88 MPH?

Good one.....

Jul 7, 2003 | 02:57 PM

theta00k@yahoo.com

Guest

Posts: n/a

Re: accent won't start

"nailgunner" <nailgunner@prodigy.net> wrote in message news:<c9XNa.287$lX4.36@newssvr16.news.prodigy.com> ...
> "nailgunner" <nailgunner@prodigy.net> wrote in message
> news:96ANa.18$BI2.5954736@newssvr15.news.prodigy.c om...
> > I have a 2000 accent 4cyl. that died the other day.....while in
> > traffic........and would not restart.
>
> Now have taken scan and code reads P0334 camshaft position sensor......Could
> it have jumped time???

No such code.