Civic Oil Pan
Guest
Posts: n/a
Re: Civic Oil Pan
JR,
Try a tap first (for spark plug holes they called it a "thread chaser")
and if that doesn't work consider a "heli-coil" (I think that's the brand
name). For that you drill the hole and run this plug into it, to hard to
explain here... http://www.emhart.com/products/helicoil.html.
Either way you go it is much easier than removing the engine.
David
dgb
"JR" <jreld@softhome.net> wrote in message
news:0TN_a.1211$sx4.967@fe05.atl2.webusenet.com...
> What is involved in replacing the oil pan on a 93 Civic DX? There is some
> sort of obstruction, but I can't tell if it's a motor mount or ??
>
> Is there any alternative to replacing the pan for a stripped oil drain
hole?
>
> Many thanks
>
>
>
Try a tap first (for spark plug holes they called it a "thread chaser")
and if that doesn't work consider a "heli-coil" (I think that's the brand
name). For that you drill the hole and run this plug into it, to hard to
explain here... http://www.emhart.com/products/helicoil.html.
Either way you go it is much easier than removing the engine.
David
dgb
"JR" <jreld@softhome.net> wrote in message
news:0TN_a.1211$sx4.967@fe05.atl2.webusenet.com...
> What is involved in replacing the oil pan on a 93 Civic DX? There is some
> sort of obstruction, but I can't tell if it's a motor mount or ??
>
> Is there any alternative to replacing the pan for a stripped oil drain
hole?
>
> Many thanks
>
>
>
Guest
Posts: n/a
Re: Civic Oil Pan
JR,
Try a tap first (for spark plug holes they called it a "thread chaser")
and if that doesn't work consider a "heli-coil" (I think that's the brand
name). For that you drill the hole and run this plug into it, to hard to
explain here... http://www.emhart.com/products/helicoil.html.
Either way you go it is much easier than removing the engine.
David
dgb
"JR" <jreld@softhome.net> wrote in message
news:0TN_a.1211$sx4.967@fe05.atl2.webusenet.com...
> What is involved in replacing the oil pan on a 93 Civic DX? There is some
> sort of obstruction, but I can't tell if it's a motor mount or ??
>
> Is there any alternative to replacing the pan for a stripped oil drain
hole?
>
> Many thanks
>
>
>
Try a tap first (for spark plug holes they called it a "thread chaser")
and if that doesn't work consider a "heli-coil" (I think that's the brand
name). For that you drill the hole and run this plug into it, to hard to
explain here... http://www.emhart.com/products/helicoil.html.
Either way you go it is much easier than removing the engine.
David
dgb
"JR" <jreld@softhome.net> wrote in message
news:0TN_a.1211$sx4.967@fe05.atl2.webusenet.com...
> What is involved in replacing the oil pan on a 93 Civic DX? There is some
> sort of obstruction, but I can't tell if it's a motor mount or ??
>
> Is there any alternative to replacing the pan for a stripped oil drain
hole?
>
> Many thanks
>
>
>
Guest
Posts: n/a
Re: Civic Oil Pan
The exhaust downpipe is in the way. It is easy to remobe the nine nuts at
the cylinder head and drop the WHOLE manifold.
--
Charles Tague
93 Honda Civic DX HB
1.6L SOHC VTEC 14.85 @ 89 mph,1.98 60 ft.
With ZEX 85 hp ZEX 13.09 @ 103 mph, 1.81 60ft.
86 Pontiac Trans Am
225/50/15 GForce Drag Radials
305 peanut cammed 15.29 @ 88 mph
http://home.cinci.rr.com/mistab0ne/
"JR" <jreld@softhome.net> wrote in message
news:0TN_a.1211$sx4.967@fe05.atl2.webusenet.com...
> What is involved in replacing the oil pan on a 93 Civic DX? There is some
> sort of obstruction, but I can't tell if it's a motor mount or ??
>
> Is there any alternative to replacing the pan for a stripped oil drain
hole?
>
> Many thanks
>
>
>
the cylinder head and drop the WHOLE manifold.
--
Charles Tague
93 Honda Civic DX HB
1.6L SOHC VTEC 14.85 @ 89 mph,1.98 60 ft.
With ZEX 85 hp ZEX 13.09 @ 103 mph, 1.81 60ft.
86 Pontiac Trans Am
225/50/15 GForce Drag Radials
305 peanut cammed 15.29 @ 88 mph
http://home.cinci.rr.com/mistab0ne/
"JR" <jreld@softhome.net> wrote in message
news:0TN_a.1211$sx4.967@fe05.atl2.webusenet.com...
> What is involved in replacing the oil pan on a 93 Civic DX? There is some
> sort of obstruction, but I can't tell if it's a motor mount or ??
>
> Is there any alternative to replacing the pan for a stripped oil drain
hole?
>
> Many thanks
>
>
>
Guest
Posts: n/a
Re: Civic Oil Pan
The exhaust downpipe is in the way. It is easy to remobe the nine nuts at
the cylinder head and drop the WHOLE manifold.
--
Charles Tague
93 Honda Civic DX HB
1.6L SOHC VTEC 14.85 @ 89 mph,1.98 60 ft.
With ZEX 85 hp ZEX 13.09 @ 103 mph, 1.81 60ft.
86 Pontiac Trans Am
225/50/15 GForce Drag Radials
305 peanut cammed 15.29 @ 88 mph
http://home.cinci.rr.com/mistab0ne/
"JR" <jreld@softhome.net> wrote in message
news:0TN_a.1211$sx4.967@fe05.atl2.webusenet.com...
> What is involved in replacing the oil pan on a 93 Civic DX? There is some
> sort of obstruction, but I can't tell if it's a motor mount or ??
>
> Is there any alternative to replacing the pan for a stripped oil drain
hole?
>
> Many thanks
>
>
>
the cylinder head and drop the WHOLE manifold.
--
Charles Tague
93 Honda Civic DX HB
1.6L SOHC VTEC 14.85 @ 89 mph,1.98 60 ft.
With ZEX 85 hp ZEX 13.09 @ 103 mph, 1.81 60ft.
86 Pontiac Trans Am
225/50/15 GForce Drag Radials
305 peanut cammed 15.29 @ 88 mph
http://home.cinci.rr.com/mistab0ne/
"JR" <jreld@softhome.net> wrote in message
news:0TN_a.1211$sx4.967@fe05.atl2.webusenet.com...
> What is involved in replacing the oil pan on a 93 Civic DX? There is some
> sort of obstruction, but I can't tell if it's a motor mount or ??
>
> Is there any alternative to replacing the pan for a stripped oil drain
hole?
>
> Many thanks
>
>
>
Guest
Posts: n/a
Re: Civic Oil Pan
In article <0TN_a.1211$sx4.967@fe05.atl2.webusenet.com>, "JR"
<jreld@softhome.net> wrote:
> What is involved in replacing the oil pan on a 93 Civic DX? There is some
> sort of obstruction, but I can't tell if it's a motor mount or ??
>
> Is there any alternative to replacing the pan for a stripped oil drain hole?
>
> Many thanks
Check with your auto parts store for an oversize drain plug repair kit.
--
To email, turn cold to hot.
<jreld@softhome.net> wrote:
> What is involved in replacing the oil pan on a 93 Civic DX? There is some
> sort of obstruction, but I can't tell if it's a motor mount or ??
>
> Is there any alternative to replacing the pan for a stripped oil drain hole?
>
> Many thanks
Check with your auto parts store for an oversize drain plug repair kit.
--
To email, turn cold to hot.
Guest
Posts: n/a
Re: Civic Oil Pan
In article <0TN_a.1211$sx4.967@fe05.atl2.webusenet.com>, "JR"
<jreld@softhome.net> wrote:
> What is involved in replacing the oil pan on a 93 Civic DX? There is some
> sort of obstruction, but I can't tell if it's a motor mount or ??
>
> Is there any alternative to replacing the pan for a stripped oil drain hole?
>
> Many thanks
Check with your auto parts store for an oversize drain plug repair kit.
--
To email, turn cold to hot.
<jreld@softhome.net> wrote:
> What is involved in replacing the oil pan on a 93 Civic DX? There is some
> sort of obstruction, but I can't tell if it's a motor mount or ??
>
> Is there any alternative to replacing the pan for a stripped oil drain hole?
>
> Many thanks
Check with your auto parts store for an oversize drain plug repair kit.
--
To email, turn cold to hot.
Guest
Posts: n/a
Re: Civic Oil Pan
My car recently had the same problem.
My autoparts guy,,,,best int he state,,,,,btw
suggested a "BUTTERFLY" This is basically a rubber stopper with a
screw and a wing nut on both sides. The washers on either size make
the rubber stopper expand when the wingnut is turned.......We use the
same type of device at work for plugging vacuum lines.
So far it's held with no problems. My wife drove it 2500 miles to
Florida and back and it's constantly on the go.
Check it out....it's designed especially for this problem and it's
cheap and doesn't require you to modify your oilpan.
PT
On Thu, 14 Aug 2003 11:53:24 -0400, "DGB" <dgbtfs@bellsouth.net>
wrote:
>JR,
>
> Try a tap first (for spark plug holes they called it a "thread chaser")
>and if that doesn't work consider a "heli-coil" (I think that's the brand
>name). For that you drill the hole and run this plug into it, to hard to
>explain here... http://www.emhart.com/products/helicoil.html.
>Either way you go it is much easier than removing the engine.
>
>David
>dgb
>
>"JR" <jreld@softhome.net> wrote in message
>news:0TN_a.1211$sx4.967@fe05.atl2.webusenet.com.. .
>> What is involved in replacing the oil pan on a 93 Civic DX? There is some
>> sort of obstruction, but I can't tell if it's a motor mount or ??
>>
>> Is there any alternative to replacing the pan for a stripped oil drain
>hole?
>>
>> Many thanks
>>
>>
>>
>
>
My autoparts guy,,,,best int he state,,,,,btw
suggested a "BUTTERFLY" This is basically a rubber stopper with a
screw and a wing nut on both sides. The washers on either size make
the rubber stopper expand when the wingnut is turned.......We use the
same type of device at work for plugging vacuum lines.
So far it's held with no problems. My wife drove it 2500 miles to
Florida and back and it's constantly on the go.
Check it out....it's designed especially for this problem and it's
cheap and doesn't require you to modify your oilpan.
PT
On Thu, 14 Aug 2003 11:53:24 -0400, "DGB" <dgbtfs@bellsouth.net>
wrote:
>JR,
>
> Try a tap first (for spark plug holes they called it a "thread chaser")
>and if that doesn't work consider a "heli-coil" (I think that's the brand
>name). For that you drill the hole and run this plug into it, to hard to
>explain here... http://www.emhart.com/products/helicoil.html.
>Either way you go it is much easier than removing the engine.
>
>David
>dgb
>
>"JR" <jreld@softhome.net> wrote in message
>news:0TN_a.1211$sx4.967@fe05.atl2.webusenet.com.. .
>> What is involved in replacing the oil pan on a 93 Civic DX? There is some
>> sort of obstruction, but I can't tell if it's a motor mount or ??
>>
>> Is there any alternative to replacing the pan for a stripped oil drain
>hole?
>>
>> Many thanks
>>
>>
>>
>
>
Guest
Posts: n/a
Re: Civic Oil Pan
My car recently had the same problem.
My autoparts guy,,,,best int he state,,,,,btw
suggested a "BUTTERFLY" This is basically a rubber stopper with a
screw and a wing nut on both sides. The washers on either size make
the rubber stopper expand when the wingnut is turned.......We use the
same type of device at work for plugging vacuum lines.
So far it's held with no problems. My wife drove it 2500 miles to
Florida and back and it's constantly on the go.
Check it out....it's designed especially for this problem and it's
cheap and doesn't require you to modify your oilpan.
PT
On Thu, 14 Aug 2003 11:53:24 -0400, "DGB" <dgbtfs@bellsouth.net>
wrote:
>JR,
>
> Try a tap first (for spark plug holes they called it a "thread chaser")
>and if that doesn't work consider a "heli-coil" (I think that's the brand
>name). For that you drill the hole and run this plug into it, to hard to
>explain here... http://www.emhart.com/products/helicoil.html.
>Either way you go it is much easier than removing the engine.
>
>David
>dgb
>
>"JR" <jreld@softhome.net> wrote in message
>news:0TN_a.1211$sx4.967@fe05.atl2.webusenet.com.. .
>> What is involved in replacing the oil pan on a 93 Civic DX? There is some
>> sort of obstruction, but I can't tell if it's a motor mount or ??
>>
>> Is there any alternative to replacing the pan for a stripped oil drain
>hole?
>>
>> Many thanks
>>
>>
>>
>
>
My autoparts guy,,,,best int he state,,,,,btw
suggested a "BUTTERFLY" This is basically a rubber stopper with a
screw and a wing nut on both sides. The washers on either size make
the rubber stopper expand when the wingnut is turned.......We use the
same type of device at work for plugging vacuum lines.
So far it's held with no problems. My wife drove it 2500 miles to
Florida and back and it's constantly on the go.
Check it out....it's designed especially for this problem and it's
cheap and doesn't require you to modify your oilpan.
PT
On Thu, 14 Aug 2003 11:53:24 -0400, "DGB" <dgbtfs@bellsouth.net>
wrote:
>JR,
>
> Try a tap first (for spark plug holes they called it a "thread chaser")
>and if that doesn't work consider a "heli-coil" (I think that's the brand
>name). For that you drill the hole and run this plug into it, to hard to
>explain here... http://www.emhart.com/products/helicoil.html.
>Either way you go it is much easier than removing the engine.
>
>David
>dgb
>
>"JR" <jreld@softhome.net> wrote in message
>news:0TN_a.1211$sx4.967@fe05.atl2.webusenet.com.. .
>> What is involved in replacing the oil pan on a 93 Civic DX? There is some
>> sort of obstruction, but I can't tell if it's a motor mount or ??
>>
>> Is there any alternative to replacing the pan for a stripped oil drain
>hole?
>>
>> Many thanks
>>
>>
>>
>
>
Guest
Posts: n/a
Re: Civic Oil Pan
Mmm, I REALLY wouldn't recommend drilling a hole in the oil pan
without pulling it to clean out the steel shavings - unless you don't
mind little bits of steel circulating about inside your engine.
- Larry A.
On Thu, 14 Aug 2003 11:53:24 -0400, "DGB" <dgbtfs@bellsouth.net>
wrote:
>JR,
>
> Try a tap first (for spark plug holes they called it a "thread chaser")
>and if that doesn't work consider a "heli-coil" (I think that's the brand
>name). For that you drill the hole and run this plug into it, to hard to
>explain here... http://www.emhart.com/products/helicoil.html.
>Either way you go it is much easier than removing the engine.
>
>David
>dgb
>
>"JR" <jreld@softhome.net> wrote in message
>news:0TN_a.1211$sx4.967@fe05.atl2.webusenet.com.. .
>> What is involved in replacing the oil pan on a 93 Civic DX? There is some
>> sort of obstruction, but I can't tell if it's a motor mount or ??
>>
>> Is there any alternative to replacing the pan for a stripped oil drain
>hole?
>>
>> Many thanks
>>
>>
>>
>
>
without pulling it to clean out the steel shavings - unless you don't
mind little bits of steel circulating about inside your engine.
- Larry A.
On Thu, 14 Aug 2003 11:53:24 -0400, "DGB" <dgbtfs@bellsouth.net>
wrote:
>JR,
>
> Try a tap first (for spark plug holes they called it a "thread chaser")
>and if that doesn't work consider a "heli-coil" (I think that's the brand
>name). For that you drill the hole and run this plug into it, to hard to
>explain here... http://www.emhart.com/products/helicoil.html.
>Either way you go it is much easier than removing the engine.
>
>David
>dgb
>
>"JR" <jreld@softhome.net> wrote in message
>news:0TN_a.1211$sx4.967@fe05.atl2.webusenet.com.. .
>> What is involved in replacing the oil pan on a 93 Civic DX? There is some
>> sort of obstruction, but I can't tell if it's a motor mount or ??
>>
>> Is there any alternative to replacing the pan for a stripped oil drain
>hole?
>>
>> Many thanks
>>
>>
>>
>
>
Guest
Posts: n/a
Re: Civic Oil Pan
Mmm, I REALLY wouldn't recommend drilling a hole in the oil pan
without pulling it to clean out the steel shavings - unless you don't
mind little bits of steel circulating about inside your engine.
- Larry A.
On Thu, 14 Aug 2003 11:53:24 -0400, "DGB" <dgbtfs@bellsouth.net>
wrote:
>JR,
>
> Try a tap first (for spark plug holes they called it a "thread chaser")
>and if that doesn't work consider a "heli-coil" (I think that's the brand
>name). For that you drill the hole and run this plug into it, to hard to
>explain here... http://www.emhart.com/products/helicoil.html.
>Either way you go it is much easier than removing the engine.
>
>David
>dgb
>
>"JR" <jreld@softhome.net> wrote in message
>news:0TN_a.1211$sx4.967@fe05.atl2.webusenet.com.. .
>> What is involved in replacing the oil pan on a 93 Civic DX? There is some
>> sort of obstruction, but I can't tell if it's a motor mount or ??
>>
>> Is there any alternative to replacing the pan for a stripped oil drain
>hole?
>>
>> Many thanks
>>
>>
>>
>
>
without pulling it to clean out the steel shavings - unless you don't
mind little bits of steel circulating about inside your engine.
- Larry A.
On Thu, 14 Aug 2003 11:53:24 -0400, "DGB" <dgbtfs@bellsouth.net>
wrote:
>JR,
>
> Try a tap first (for spark plug holes they called it a "thread chaser")
>and if that doesn't work consider a "heli-coil" (I think that's the brand
>name). For that you drill the hole and run this plug into it, to hard to
>explain here... http://www.emhart.com/products/helicoil.html.
>Either way you go it is much easier than removing the engine.
>
>David
>dgb
>
>"JR" <jreld@softhome.net> wrote in message
>news:0TN_a.1211$sx4.967@fe05.atl2.webusenet.com.. .
>> What is involved in replacing the oil pan on a 93 Civic DX? There is some
>> sort of obstruction, but I can't tell if it's a motor mount or ??
>>
>> Is there any alternative to replacing the pan for a stripped oil drain
>hole?
>>
>> Many thanks
>>
>>
>>
>
>
Thread
Thread Starter
Forum
Replies
Last Post
Mike Salazar
Honda Mailing List
2
Jul 24, 2003 04:58 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)