180sx STOLEN
#1
Junior GTcars Poster
Thread Starter
Join Date: Jul 2005
Location: Whitby, Ontario
Posts: 221
Rep Power: 693
180sx STOLEN
I dont know if im posting this in the right place, however its very important! my friend got his silver 180sx that was imported from japan stolen today! there is no way you can miss this car so heres a link to his post.
http://www.S O N 240sx.org/forums/sh...ad.php?t=35385
S O N forums usually dont work btw so here are a link to some pictures
180sx Shots - Fall - Redline Syndicate Photo Gallery
CALL 905 666 0931 or 905 244 3031 or 911
his name is jared
http://www.S O N 240sx.org/forums/sh...ad.php?t=35385
S O N forums usually dont work btw so here are a link to some pictures
180sx Shots - Fall - Redline Syndicate Photo Gallery
CALL 905 666 0931 or 905 244 3031 or 911
his name is jared
#6
Junior GTcars Poster
Thread Starter
Join Date: Jul 2005
Location: Whitby, Ontario
Posts: 221
Rep Power: 693
KEY FEATURES OF PARTS, if it has been parted:
-small chip on compressor side of turbo blade (t28 non BB from s14)
-kei office fronts ONLY with surface rust on coil springs
-rust on greddy rs BOV adjustment screw
-dented Trust 3" down pipe where it bends and becomes parallel to chassis (looks like it got bottomed out badly)
-kei office (modex) wheels are painted white, not original white or powder coat (so there will be chips from the lug nuts)
-hks evc 5 thats not calibrated yet
- bings exhaust will make a rattling noise if tipped upside down (vertically up) due to something in the muffler
- side skirts are oem replica's, non urethane
- fmic is s14 sr and is unique because i had to personally modify it to make it work with a ca18det
the cold side major vacuum line has been cut and then thats where the bov comes into play
- front bumper has been shaved back poorly from when the oil cooler was mounted up front.
- in case its cut up to a clip, theres a oil cooler or battery tray plate welded to the chassis, even if its removed you'll see the weld marks
-small chip on compressor side of turbo blade (t28 non BB from s14)
-kei office fronts ONLY with surface rust on coil springs
-rust on greddy rs BOV adjustment screw
-dented Trust 3" down pipe where it bends and becomes parallel to chassis (looks like it got bottomed out badly)
-kei office (modex) wheels are painted white, not original white or powder coat (so there will be chips from the lug nuts)
-hks evc 5 thats not calibrated yet
- bings exhaust will make a rattling noise if tipped upside down (vertically up) due to something in the muffler
- side skirts are oem replica's, non urethane
- fmic is s14 sr and is unique because i had to personally modify it to make it work with a ca18det
the cold side major vacuum line has been cut and then thats where the bov comes into play
- front bumper has been shaved back poorly from when the oil cooler was mounted up front.
- in case its cut up to a clip, theres a oil cooler or battery tray plate welded to the chassis, even if its removed you'll see the weld marks
#7
I dunno if this is the robbers sale or yours but they used your picture of the car. Found it on Kijiji people don't hold on to hot cars for a long time they paint it or sell it. So look for any ads on classifieds the traders. Here's what I found. FS: JDM Drift Wheels / Rims With Tires - Modex - Off a 180sx - Toronto Cars & Vehicles - Kijiji Toronto
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)