2008 Bmw M3
#1
Experienced GTcars Poster
Thread Starter
iTrader: (2)
Join Date: Feb 2005
Location: Toronto,Ontario
Posts: 2,065
Rep Power: 743
2008 Bmw M3
BMW has released images of the production 2008/2009 M3 coupe. The information comes only weeks after the automaker revealed the M3 Concept at the Geneva Motor Show in Switzerland. Like the concept, the production car features a high-revving V8 powerplant, tuned suspension, a six-speed manual transmission, a carbon fiber roof, and all the exterior modifications typical of an "M" car.
Due to go on sale in North American in mid-2008 as a 2009 model, the M3 will target the Lexus IS-F, Audi RS5, and Mercedes CLK63 AMG. Convertible and sedan variants are expected to follow later in 2008.
The M3's V8 powerplant has two more cylinders than its predecessor, delivering 420 hp from 4.0 litters and maximum torque of 295 lb-ft at 3,900 rpm. In keeping with BMW's high-revving "M" tradition, maximum engine speed is 8,300 rpm. The engine is the lightest V8 in the world, weighing less than the previous M3's inline-six.
Reminiscent of the carbon fiber roof panel used on the M6 coupe, the M3's CFRP roof cuts unnecessary weight, and lowers the car's center of gravity. It also lets the roof edge appear flatter and thus lowers the perceived body height.
The production M3 is pictured with 18-inch wheels, though BMW is also expected to offer 19-inch alloys similar to the Y-spoke ones featured on the M3 concept.
Due to go on sale in North American in mid-2008 as a 2009 model, the M3 will target the Lexus IS-F, Audi RS5, and Mercedes CLK63 AMG. Convertible and sedan variants are expected to follow later in 2008.
The M3's V8 powerplant has two more cylinders than its predecessor, delivering 420 hp from 4.0 litters and maximum torque of 295 lb-ft at 3,900 rpm. In keeping with BMW's high-revving "M" tradition, maximum engine speed is 8,300 rpm. The engine is the lightest V8 in the world, weighing less than the previous M3's inline-six.
Reminiscent of the carbon fiber roof panel used on the M6 coupe, the M3's CFRP roof cuts unnecessary weight, and lowers the car's center of gravity. It also lets the roof edge appear flatter and thus lowers the perceived body height.
The production M3 is pictured with 18-inch wheels, though BMW is also expected to offer 19-inch alloys similar to the Y-spoke ones featured on the M3 concept.
#11
Now BMW have released the car for the market. Heres a link to check it out and build one with your personal choices BMW Deutschland
#12
It would be nice if it wasn't riced out. I have no doubt it will be amazing to drive and probably really fast. The bumpers and rims are horrible. Good thing that can be swapped out. Also not feeling the interior.
P.S the A5 isn't a 2 door A4. It looks completely different. The only 2 door A4 is the convertable
P.S the A5 isn't a 2 door A4. It looks completely different. The only 2 door A4 is the convertable