Any Crx fans here ?? Pics of my 1990 Crx Si
#1
Any Crx fans here ?? Pics of my 1990 Crx Si
Hello GTcars members, just wanted to post some pics of my baby.
Lemme know what you think...
video:
Also got some Brand new never used OEM Crx mats on ebay for $50 (worth over $400)
List of mods:
Suspension:
- PIC Performance select coilovers (spring rates 12k front & 14k rear)
- Neuspeed rear sway Bar
- Neuspeed front sway Bar
- Neuspeed rear tie bar
- Neuspeed front Upper strut bar
Exterior:
- Original rio red paint
- 16x7 et40 Speedy Racemode wheels (flat black)
- 205-40 16 Falken Azenis RT615 tires
- ******** gunmetal lightweight lug nuts
- Stainless steel brake lines
- 15/16th 89 Prelude Si master cylinder
- Brembo front x-drilled rotors, with brembo blanks in the rear, zinc coated
- Hawk HP+ pads all around
- New OEM Honda calipers all around
- Various mouldings + trim peices replaced new
Powertrain:
- stock d16a6 230,000 kms burns no oil !!!!
- Crane ignition system, with MSD Coil + Cap
- Magnecor wires
- K&N panel filter
- DC Sport 4-2-1 headers (wrapped)
- Supersprint muffler with twin round chrome tips (2.25" piping)
- short shifter
- exedy stage 2 clutch,lightened flywheel
- New OEM Valve cover
Interior/stereo:
- 320mm Momo Monte Carlo wheel (1" aluminum spacer on hub)
- Sparco Pedals
- Stock OEM Honda shift ****
- NEW OEM CRX Floor mats ! (Show only)
- OEM CRX Armrest
- Rear JDM bass tubes in factory speaker location with JBL 5.25" Coaxials
- Alpine 4 channel amp
- Alpine 7893 cd player
- Boston Acoutics 6.5" 2 way components up front
Lemme know what you think...
video:
Also got some Brand new never used OEM Crx mats on ebay for $50 (worth over $400)
List of mods:
Suspension:
- PIC Performance select coilovers (spring rates 12k front & 14k rear)
- Neuspeed rear sway Bar
- Neuspeed front sway Bar
- Neuspeed rear tie bar
- Neuspeed front Upper strut bar
Exterior:
- Original rio red paint
- 16x7 et40 Speedy Racemode wheels (flat black)
- 205-40 16 Falken Azenis RT615 tires
- ******** gunmetal lightweight lug nuts
- Stainless steel brake lines
- 15/16th 89 Prelude Si master cylinder
- Brembo front x-drilled rotors, with brembo blanks in the rear, zinc coated
- Hawk HP+ pads all around
- New OEM Honda calipers all around
- Various mouldings + trim peices replaced new
Powertrain:
- stock d16a6 230,000 kms burns no oil !!!!
- Crane ignition system, with MSD Coil + Cap
- Magnecor wires
- K&N panel filter
- DC Sport 4-2-1 headers (wrapped)
- Supersprint muffler with twin round chrome tips (2.25" piping)
- short shifter
- exedy stage 2 clutch,lightened flywheel
- New OEM Valve cover
Interior/stereo:
- 320mm Momo Monte Carlo wheel (1" aluminum spacer on hub)
- Sparco Pedals
- Stock OEM Honda shift ****
- NEW OEM CRX Floor mats ! (Show only)
- OEM CRX Armrest
- Rear JDM bass tubes in factory speaker location with JBL 5.25" Coaxials
- Alpine 4 channel amp
- Alpine 7893 cd player
- Boston Acoutics 6.5" 2 way components up front
#11
nice ride man, have seen pics of it onother forums a while ago, always inspired me to go out and find a clean rex for a project car
and from what i remember, ur winter beater is a pretty clean ride too lol
and i saw you driving down dufferin the other day..
keep it up man
and from what i remember, ur winter beater is a pretty clean ride too lol
and i saw you driving down dufferin the other day..
keep it up man
#12
The car is not for sale... unless I get a good price.
And yup, I still have the white EF Civic , also a 1990 Si..
My winter beater
- 174,000 kms
- Original paint
- OEM civic armrest (not pictured)
- Koni/Ground control coilovers(550 f + 650 r)
- Suspension Techniques front and rear sway bar
- Neuspeed front strut bar
- 15/16" Master cylinder
- Stainless steel lines
- Hawk HP+ pads
- 14x6 ASA HS2 wheels
And yup, I still have the white EF Civic , also a 1990 Si..
My winter beater
- 174,000 kms
- Original paint
- OEM civic armrest (not pictured)
- Koni/Ground control coilovers(550 f + 650 r)
- Suspension Techniques front and rear sway bar
- Neuspeed front strut bar
- 15/16" Master cylinder
- Stainless steel lines
- Hawk HP+ pads
- 14x6 ASA HS2 wheels