BlackZ28

nice black z bro. really clean.

BlackZ28

been saying a bunch of stuff. anyways, found the forum today and joined. looking to expand my automotive community. heres my project. its my first car but money's tight. I'm a student and tuition/living is expensive so i do my best.

its a 1984 Chevrolet Camaro Z/28 with 85 iroc ground effects (put on by previous owner)
originally purchased without an engine heres whats up so far.

Engine:
010 casting small block chevy bored .060" over. (done by previous owner) / pre-smog heads
hypereutectic pistons (done by previous owner)
edelbrock camshaft 477/477 (done by previous owner)
edelbrock RPM Air Gap intake manifold
Holley model 4150 4777c 650cfm carb, mech secondaries, man choke, squarebore.
hooker competition headers
taylor performance HEI dizzy with MSD streetfire wires.
rebuilt with all ARP bolts, new flywheel mated to a T-5 5-speed.

To come:
UMI suspension bits: subframe connectors, wonderbar, lca's, lcarbs, adjustable panhard bar.
Eibach pro-kit with koni-yellows on all 4 corners.
swap to disc posi rear end (if the current one isn't posi, dunno haven't started it yet)
once I finish school (in like.. 5-6 years) if i still miraculously have this camaro, I'm going to build a twin turbo small block and shoot for 1000-1600hp, yet keep it still streetable (beauty of turbos).

here are some pics. not very clean. figure if i wash it it'll just get dirty again. the dirt protects it from other dirt while its inoperable.







(no more horrid seat covers)

rocketman

Some nice pics everyone. Thanks for sharing.

Gnomey

this is my ride.. have some big plans for it too unfortunately over the winter the hood took a toll for the worse

COONHOUND

Yep, your right. I think all the GM engineers slept when they had their class on reliability and fuel economy.
And yeah the graph looks strange because it takes time for the turbo to spool up i guess.2800rpm and its spooled up like in any Turbo car. Its sausuge before the turbo kicks in tho.

BlackZ28

Funny you should say that, GM trucks are among the most reliable cars in the world. the small block chevy is incredibly reliable through its simplicity. their fuel economy isn't nearly as bad as you think., especially when you consider the power you get from cars such as the new camaro and the vette, they're very efficient for the power they make. besides, this is a site for enthusiasts, speed costs money, how fast do you want to go. when you lose a race, do you take solice in the fact that you used less gas than the winner? think about this, the 2.4L ecotec in the chevy malibu gets 3mpg MORE than a toyota camry. GM's ecotec 4cyl is actually a descent engine, granted, GM's non-V8's in the past 20 years have been less than stellar, today they're actually quite good. should look up the numbers on competing cars. I'm not a GM or domestic fan. I'm not ignorant. I know that the japanese make good cars, so do europeans. I like many of them. I love audi's and BMW's and Nissans. but you have to agree, 118ft lbs of torque is really not that much, my lugnuts are almost torqued that high.

I understand the turbo's have to spool, but ZERO hp? how can it be making absolutely no power? theoretically it shouldn't even be able to make it to 2800rpms without any power. its impossible.

vortecfiero

racerX

i love that camaro on page 3, what year is that..a 69?

SHOBout

Well I'm new here and not quite sure where I should post this, so I'll post it here. This is my car I just picked up a few weeks back. Its an '89 Taurus SHO, mods in signature.

corbin123

well here is my whip
there is to much stuff to list so i will just tell every one the basic stuff
2.0l gti motor
t4 turbo
chiped
and has a fmu

Manimillion

Here is one of my cars.





Best 1/4 Mile time is 10.3 @ 133mph on 94octane pump gas, only @ 15psi, and a very conservative launch.

I am not going to fill up the thread with my pictures, but if you want more you can follow these links

Click for more pictures

One more here!

Manimillion

And here is one of my other cars worth posting here...

Took almost the whole summer to put the car together. Although it could have been done faster, I rather do things slowly taking my time and without cutting corners.

The car is a 1999 Ford Contour SVT.

There are a lot of FWD haters out there, but once they watch some touring car racing, they might change their mind. (this car is far away from being a touring car, but it is a well set up car for some serious track action)

It'll be no pig in a straight line either... On the 1/4 mile, it should be able to pull a 12.9x - 13.1x easly (atleast that is what we are aiming for, and with proper tuning it is easly achievable, since we have already done a 13.5 @ 104mph witha similar set up car, and on the first run without launcing hard and being properly tuned, this car has a shorter final drive, and less weight which it'll help out getting even better times)

Mod list as follows (as much as I can remember)

Drivetrain:

- 3L Duratec 24v DOHC engine (same engine found in Ford Escape's and also Noble M12's, Noble's are Forced inducted)
- Mondeo ST220 Upper Intake Manifold, Ceramic Coated
- Mondeo ST220 Lower Intake Manifold
- Custom Intake
- 65mm Ford Mustang Throttle Body
- Contour SVT Cams
- Clevite 77 Performance Bearings
- MSDS Headers
- Custom 2" Stainless Steel True Dual Exhaust w/2 Magnaflow Mufflers per bank
- 26lb Ford Mustang Injectors
- Custom Return Fuel Rail
- Quaife LSD
- Capaldi Racing Straight Cut Final Drive
- Spec Stage 3+ Clutch
- Spec Lightweight Aluminum Flywheel
- Moroso Racing Oil Accumulator w/Electronic Valve Unit
- Misc OEM Ford parts and Mods to get the SVT Cams to work with this engine (ie timing chains, tensioners etc...)
- SCT Xcal 2 for Tuning


Suspension, Chassis and Brakes
- Koni Yellow Struts
- Ground Control Coil Overs
- Custom 6pt rollbar
- Custom Subframe Connectors
- Willwood Four Piston Forged Billet SuperLight Calipers (front)
- Two piece 13" Coleman Rotors (front)
- Two piece 11.75" Coleman Rotors (rear)
- Stainless Steel Braided Brake Lines

Interior & Misc
- Battery Relocated to the trunk (Optima Red Top Sealed)
- Corbeau Forza Seats
- Corbeau 3" 5 point Harness Belts
- Sparco 333 Black Suede Steering Wheel
- Sparco Tecno Shift ****
- Blox Racing Lightweight Aluminum Lug Nuts

Wheels
- 17"x7" OZ Racing Superleggera wrapped with 225/45-17 Falken Azenis RT215 (street)
- 17"x7.5" Kosei K1-R wrapped with 225/45-17 Avon Tech-R Slicks (track)

Here are some pictures


Hope you liked seeing something different (:

2TONE_93GT

iTrader: (3)

I think the idea is pics of your ride, so add more.

The contour is sick.

And to keep the thread on track, a pic of my engine bay

voltar

Damn nice CSVT, are you on CEG by any chance?

Manimillion

Yes I am. Under the same username