My brand new 1967 Camaro.
#1
1967 Camaro Buildup.
I had a lot of mall gift cards so I decided to buy somethig kind of pointless and I ended up at radio shack. I purchased the starter kit, carbon fiber chassis upgrade, body kit packages, and springs/tie rod ends. Sadly though I have learned that our drive way nor the nearby road is for this little car. I was drifting side ways (yes they can do that) and I hit a rock and the car ended up rolling 5 times. From the pics you can see the damage was not that bad, some of the chrome was knocked off the bottom of the rear bumper and it got a ding on the roof, fender, and hood. I'm not worried about it though cause tonight I'm converting it to a 70's model SS with a 4 inch cowl. These things are very addicting if you have some cash laying around I suggest picking one up.
#6
Iv always wanted one just so I could mess around with the style of it.. I also have always wanted one of those huge H2's so I could give it a custom paint job just for the fun of it lol..
#9
Pic #1
I took the little Camaro over to my grandmother's place (very flat/long driveway) and low and behold I discover their are rocks every where. I ended up hitting one and taking off some of the chrome plating. I think I will just stick with the basketball court across the street for now.
Pic #2
First mod I decided to do was to upgrade the suspension. In the kit it comes three different size springs, new shocks, and three different size tie rod ends.
Pic #3
Stock coilovers
Pic #4/5
Stock coil overs removed.
Pic #6
New coil over apart.
Pic #7
Coil over assembled.
Pic #8/9
Pic of new coil overs installed in the front/rear.
Pic #10
Bottom front skid plate unbolted.
Pic #11
Skid plate removed.
Pic #12
Front end just kind of fell apart on me.
Pic #13
Wheels removed with some kind of plastics stablizer bar at the bottom.
Pic #14
Old tierod end (yellow) and new tierod end (red).
Pic #15
Reassembling front-end (not fun).
Pic #16
Rebolting skid plate.
Pic #17
Suspension is done.
Pic #18/19/20
Install of new steering wheel.
Pic #21/22
New racing slicks.
Pic #23/24/25
New body mods, early 1st gen front end with late 1st gen rear, side pipes, cowl hood, and spoiler (which will be added when I find a 2mm drill bit).
Pic #The rest.
Just some more photos I took.
I took the little Camaro over to my grandmother's place (very flat/long driveway) and low and behold I discover their are rocks every where. I ended up hitting one and taking off some of the chrome plating. I think I will just stick with the basketball court across the street for now.
Pic #2
First mod I decided to do was to upgrade the suspension. In the kit it comes three different size springs, new shocks, and three different size tie rod ends.
Pic #3
Stock coilovers
Pic #4/5
Stock coil overs removed.
Pic #6
New coil over apart.
Pic #7
Coil over assembled.
Pic #8/9
Pic of new coil overs installed in the front/rear.
Pic #10
Bottom front skid plate unbolted.
Pic #11
Skid plate removed.
Pic #12
Front end just kind of fell apart on me.
Pic #13
Wheels removed with some kind of plastics stablizer bar at the bottom.
Pic #14
Old tierod end (yellow) and new tierod end (red).
Pic #15
Reassembling front-end (not fun).
Pic #16
Rebolting skid plate.
Pic #17
Suspension is done.
Pic #18/19/20
Install of new steering wheel.
Pic #21/22
New racing slicks.
Pic #23/24/25
New body mods, early 1st gen front end with late 1st gen rear, side pipes, cowl hood, and spoiler (which will be added when I find a 2mm drill bit).
Pic #The rest.
Just some more photos I took.