Nice Day, Did some testing in the 68
03-24-2007, 01:30 AM
#31
Skilled GTcars Poster
Thread Starter
Join Date: Feb 2006
Location: Oshawa
Posts: 781
Rep Power: 687 
Originally Posted by 87Shelbyz_Turbo
Now i know who u are bassgn. You were datin Darrens mom i belive? i forget here name now. drives the white cavy droptop with 18's Anyways. Nice car man Hope to seeya around this year again. Chow.
Actually you know the owner of the camaro, I am a little young for Darren's mom... My wife is 25.
I'll probly meet you if you hang out where the Camaro does.
:thumbsup:
03-24-2007, 10:08 AM
#32
Average GTcars Poster
Join Date: Feb 2005
Location: Hamilton
Posts: 530
Rep Power: 716
Originally Posted by judgez24
yeah still like to turn...but...a chevette.... hehe
actualyl a friend of mine put a 3.8 into a chevette, made it across town and the rear end wsa glowing red, lol
actualyl a friend of mine put a 3.8 into a chevette, made it across town and the rear end wsa glowing red, lol
He had a stock 3.8 chevy in it and ran 14.0 with it.
I saw the car a year later at a car show and he had put a blower on it. Not sure what it ran after that.
I think a turbo buick in a chevette would be cool. I check from time to time to see if any clean chevettes are left and for sale. One of these days I`ll build one.
03-24-2007, 10:44 AM
#33
Skilled GTcars Poster
Thread Starter
Join Date: Feb 2006
Location: Oshawa
Posts: 781
Rep Power: 687
Originally Posted by R/T kota
I`ve always wanted to put a v6 in a chevette ever since I saw that one at cayuga back in the 80s.
He had a stock 3.8 chevy in it and ran 14.0 with it.
I saw the car a year later at a car show and he had put a blower on it. Not sure what it ran after that.
I think a turbo buick in a chevette would be cool. I check from time to time to see if any clean chevettes are left and for sale. One of these days I`ll build one.
He had a stock 3.8 chevy in it and ran 14.0 with it.
I saw the car a year later at a car show and he had put a blower on it. Not sure what it ran after that.
I think a turbo buick in a chevette would be cool. I check from time to time to see if any clean chevettes are left and for sale. One of these days I`ll build one.
My best Friends' brother in law ows a fully caged and tubbed chevette with a BBC 454 on spray. this ran mid 10 spinning the whole track,.
and yeah, I'm also keeping an eye out for a clean RWD small car to build a street terror from. the GN draws way too much attention.,
03-24-2007, 12:29 PM
#34
GTcars - Post God !
iTrader: (3)
Join Date: May 2005
Location: Kitchener
Posts: 4,367
Rep Power: 788
MOst of the Chevettes left out there now, would need new rear shock towers put in. One of my buddies used to have a 4.3l 5 speed chevette. Sick little car. no traction on the street.
03-24-2007, 10:25 PM
#35
~~ Hardcore Newb ~~
Join Date: Dec 2006
Location: Oshawa
Posts: 3
Rep Power: 0
Info on car is as follows
Stage 2 4.5 liter 8.5to 1
Accel DFI
Single Stage 2 ATR Headers
76 GTQ Turbo Rated 975 HP
Stage 2 Aluminum Heads
2.1 intake 1.7 Exhaust Flow 336 CFM
Buick Motorsport Crank 6.25 inches
T&D Roller Rockers 1.65 Ratio
Custom Roller Comp Cam
Roller Lifters .630 lift
Custom Speedpro Pistons
Ford 9 Inch rear end 3.55 gears
35 Spline Axles
4 link With Coilovers front and back
Just what I can think of
Thanks to all who commented on my ride, much appreciated
Taking it out for a spin sunday, maybe to Bills house
Stage 2 4.5 liter 8.5to 1
Accel DFI
Single Stage 2 ATR Headers
76 GTQ Turbo Rated 975 HP
Stage 2 Aluminum Heads
2.1 intake 1.7 Exhaust Flow 336 CFM
Buick Motorsport Crank 6.25 inches
T&D Roller Rockers 1.65 Ratio
Custom Roller Comp Cam
Roller Lifters .630 lift
Custom Speedpro Pistons
Ford 9 Inch rear end 3.55 gears
35 Spline Axles
4 link With Coilovers front and back
Just what I can think of
Thanks to all who commented on my ride, much appreciated
Taking it out for a spin sunday, maybe to Bills house
03-25-2007, 12:11 AM
#36
Skilled GTcars Poster
Thread Starter
Join Date: Feb 2006
Location: Oshawa
Posts: 781
Rep Power: 687
Originally Posted by BoostedCamaro
Info on car is as follows
Stage 2 4.5 liter 8.5to 1
Accel DFI
Single Stage 2 ATR Headers
76 GTQ Turbo Rated 975 HP
Stage 2 Aluminum Heads
2.1 intake 1.7 Exhaust Flow 336 CFM
Buick Motorsport Crank 6.25 inches
T&D Roller Rockers 1.65 Ratio
Custom Roller Comp Cam
Roller Lifters .630 lift
Custom Speedpro Pistons
Ford 9 Inch rear end 3.55 gears
35 Spline Axles
4 link With Coilovers front and back
Just what I can think of
Thanks to all who commented on my ride, much appreciated
Taking it out for a spin sunday, maybe to Bills house
Stage 2 4.5 liter 8.5to 1
Accel DFI
Single Stage 2 ATR Headers
76 GTQ Turbo Rated 975 HP
Stage 2 Aluminum Heads
2.1 intake 1.7 Exhaust Flow 336 CFM
Buick Motorsport Crank 6.25 inches
T&D Roller Rockers 1.65 Ratio
Custom Roller Comp Cam
Roller Lifters .630 lift
Custom Speedpro Pistons
Ford 9 Inch rear end 3.55 gears
35 Spline Axles
4 link With Coilovers front and back
Just what I can think of
Thanks to all who commented on my ride, much appreciated
Taking it out for a spin sunday, maybe to Bills house
Park it on the street.... till you fix that pan gasket...lol
I'll be in the garage working on my oil pump. and finishing the port match on my heads and intake.
May even start on the new braces in the Back seat if it's nice out.
Thread
Thread Starter
Forum
Replies
Last Post
Philladelphia
Honda Accord
1
03-06-2008 09:16 AM
Blaze_Bibby
Cars For Sale
2
10-25-2005 07:00 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)