sneak peak under the hood
Thread Starter
GTcars - Post God !
Joined: Oct 2004
Posts: 6,626
From: palatine,il (chicago)
Rep Power: 922 
sneak peak under the hood
i have a lot of stuff to do, and i dont know when im gonna fit it in but i got a decent amount finished today. FRCs are cut and fit, gotta send them out to Brent Franker and get some vinyl put on them and then im painting etc..l also i switched the crappy rubber connector that barely connected for a heavy duty Fernco rubber peice, much nicer but i still want to get the one from the TB to the MAF.
GTcars - Post God !
Joined: Nov 2003
Posts: 7,173
From: Valencia, CA
Rep Power: 967
jocker.
but two things...lose the loom around the fuel lines and remove the oil filler neck. the cap screws right into the valve covers.
why are you sending it to brent? so he can make some vinyls for the recessed corvette? i asked if he made anything for it and he said hed need them to do it...i guess your his guinea pig.
but two things...lose the loom around the fuel lines and remove the oil filler neck. the cap screws right into the valve covers.
why are you sending it to brent? so he can make some vinyls for the recessed corvette? i asked if he made anything for it and he said hed need them to do it...i guess your his guinea pig.
GTcars - Post God !
Joined: Nov 2003
Posts: 7,173
From: Valencia, CA
Rep Power: 967
hey i just noticed too...you dont have ASR...my car should have it too but it doesnt.
i thought ASR was standard on all LT1s starting 96 but i guess its an option. the LT1s without it make a perfect candidate for FRCs.
could you imagine trying to cut the drivers side cover to fit around ASR? wouldnt be much left. lol.
i thought ASR was standard on all LT1s starting 96 but i guess its an option. the LT1s without it make a perfect candidate for FRCs.
could you imagine trying to cut the drivers side cover to fit around ASR? wouldnt be much left. lol.
Thread Starter
GTcars - Post God !
Joined: Oct 2004
Posts: 6,626
From: palatine,il (chicago)
Rep Power: 922
i tried pulling the filler neck off when i was doing the headers but it seemed to be in there very well, so i stopped screwing with it cause i wasnt sure. o well. i have a lot more work to do here.
GTcars Regular
Joined: Jan 2005
Posts: 1,376
From: Chicago IL
Rep Power: 805
i think it looks good and i found some of the corvette covers that says z28 on a different website but i thought the looked weak http://www.fbodymotorsports.com/inc/sdetail/35029
or
or
Thread Starter
GTcars - Post God !
Joined: Oct 2004
Posts: 6,626
From: palatine,il (chicago)
Rep Power: 922
caleb, ill take a pic of mine.haha. i got them already cut for a camaro but F-that! i cut the crap out of them more.lol. but now they fit without any problems.