Rep Power: 730

so yea when im pounding my subs it cuts out after a bit and then it goes back in after about 20seconds. would anyone know why it would do that? and then my deck.... its brand new i put in a cd and turn the car off or go to the radio and back it says TOC error and then this error comes on saying CALL the hell is wrong its making me mad

 
Rep Power: 0

How do you have the subs wired?

 
Rep Power: 730

i forgot to say its my amp that turns off so it has nothing to do with subs. im guessing its my power wire becauase its bearly screwed in because the 4 gauge wire bearly fits in it to hold down i dont know man..

 
Rep Power: 0

It could still be your subs, if the impedance doesn't match the amps specs it will go into protection. It could several things but check that first.

 
Rep Power: 730

lmao im using a kenwood 1800wat amp and 2 40$ 12" pyramid 1200watt subs that amp should be killing these subs.
whats independance?

 
Rep Power: 0

Impedance is the woofers ohms reading, so if your amp will play 4 ohms stereo or 4 ohms bridged and you wired it 2 ohms than the amp will shut off to protect itself from blowing.

 
Rep Power: 760

ya that's right, make and model don't mean anything, check your power and grounds always first, if you have those subs wired in parallel that's 2 ohms, bridged amp sees half of that, so i don't care if you have 1000000 watts, if the amp isn't meant to deal with 1 ohm, it will shut down

 
Rep Power: 717

i can put u onto a really good installer that can slove that probelm