i need an amp
 

well right now i have an interfire amp...there isnt a single sticker on it (except for the serial number) and all it says is interfire. i dont know much about it, except that its a 4 channel amp bridged into a 2 channel...and it sucks.

i need a new one to run my subs. theyre 12" crossfires...single 4 ohm voice coil, 200 rms, 350 max.

ive been cruising the net all night, mostly ebay, and cant really find what im looking for: a new or used amp around $100-$150 with 400 rms.

DISTINCT AUDIO D400 Power Amplifiers (2-Channel, 400W)
SPECIFICATIONS

* 2Ωstable stereo operation
* Variable electronic crossover
* Soft remote on/off circuitry
* Level input & output
* Adjustable input level
* Wire-free PC board layouts
* MOSFET switching power supply
* Internally bridgeable
* Gold-plated terminal
* Input sensitivity: 140mV–4V
* Low/high pass: 50 Hz–250 Hz
* 45 Hz boost
* Variable Crossover
* THD: 0.02%
* 2-channel
* 400W max
* 2ΩRMS: 100W x 2
* RCA input & output jack
* Dim: 9.6"W x 2"H x 13"L
2005 CEA compliant (which means real power numbers not if lightning strikes)
$109.95 plus shipping which would be $20
that's all I see in stock that meets your power and price requirement, and would be better than what you have

also bear in mind that todays watts are different, and those subs can handle more than 200 watts from a good amp or less from a bad amp (distortion kills subs I have only seen a couple of subs blown from overpowering, and that was in competition)

interfire is a korean company that is using legacy amps btw

I just bought a 600 watt max 2 channel Legacy amp on ebay for $33!!!! Brand new in box too! Listen to Arch!

it'll hit 600 watts at 32 volts at 1hz for 1ms then smoke

I have no idea what you just said but i am just using it for 1 10" kicker comp 10

I have an old school Punch 360a2 I might be selling soon.

basically that thing will never hit that much power without blowing up. Keep the volume low or keep an extra sub

i still have that kicker ZR240 amp. i'd be willing to sell that for w/e really. 80 + shipping?. it was in the camaro. & i just didnt need it. added weight IMO. its been sittin in my room since.

would that really be what i need though? im not too much into this stuff, but i would assume since my subs can each handle 200 watts rms that i would need an amp that puts 400 rms...not 400 max.

hows this

http://www.cybergiftcenter.com/appli...sku=CP-OV2-820

or

http://www.cybergiftcenter.com/appli...&sku=CJ-PS2180

or even

http://www.cybergiftcenter.com/appli...sku=CP-PLAD214

pyle is pyramid, power acoustik won't do 400 watss if lightning strikes (I carry them, not bad for cheap but not better than what you have) jensen is about the same as you have. Speaker wattage is a useless measurement, speakers don't use watts, and if given clean power can handle more or less. The hard part is your price range. The amp I would prefer for you is backordered right now (it's a soundstream and is technically lower power than you want, but are usually underrated)