F/S Alpine V12 Amp
05-17-2006, 06:50 PM
#1
~~ Hardcore Newb ~~
Thread Starter
Join Date: Feb 2005
Posts: 123
Rep Power: 704 
F/S Alpine V12 Amp
For Sale MRV-T707 Alpine Amp
2/1 Channel Power Amplifier
Road tested and time proven, V-12 amplifiers with their "no shut down" design keep playing when you need them the most. The Audio Quality MOSFETS and Subsonic Filter restore power and produce killer, tight crisp bass. They're also Bass Engine Ready meaning they can handle the juiced signal from an Alpine Bass Engine Equipped head unit.
Key Features
• Max Power (EIAJ) 225Wx2 (4ohm; Stereo) 600Wx1 (Bridged 4ohm
• 12V RMS Continuous Power 4ohm; Stereo (0.08% THD) 70Wx2 2ohm; Stereo (0.3% THD) 120x2 Bridged 4ohm; (0.3% THD) 240x1
•14.4V RMS Continuous Power 4ohm; Stereo (0.08% THD) 100Wx2 2ohm; Stereo (0.3% THD) 170x2 Bridged 4ohm; (0.3% THD) 340x1
• S/N Ratio 100dBA
• Frequency Response: 10-50kHz
• 12dB HP/LP Crossover (50-200Hz)
• Speaker Level Input
• Bass EQ Circuit
• Subsonic Filter (15/30Hz)
• Extra Large Gold Plated Terminals with Wire Insert Capability
• Top Panel Power LED
• 4 Volt Input Capability
• Continuously Adjustable Crossovers
• DC Straight, STAR Topology & Duo-B Circuitry
• DC-DC/PWM MOSFET Power Supply
More Features:
General-Amplifiers
* 2/1 Channel Operation
* Adjustable Crossover (LP)
* Auto Overcurrent Protection
* Bass EQ Circuit
* Bass Engine Ready
* DC Straight Design
* DC-DC PWM Power Supply
* Discrete Pre-Amp Stage
* Gold Plated RCA Input Connectors
* Input Mode Selector Switch
* MOSFET Final Outputs
* MOSFET Power Supply
* MultiMode
* One side Terminal Layout
* Phase Selector
* STAR Circuitry
* Solid Copper Bus Bars
* Speaker Level Inputs
* Subsonic Filter
* Top Mounted LED Power Indicator
* This amp is in mint shape $150.00
* Brampton area
2/1 Channel Power Amplifier
Road tested and time proven, V-12 amplifiers with their "no shut down" design keep playing when you need them the most. The Audio Quality MOSFETS and Subsonic Filter restore power and produce killer, tight crisp bass. They're also Bass Engine Ready meaning they can handle the juiced signal from an Alpine Bass Engine Equipped head unit.
Key Features
• Max Power (EIAJ) 225Wx2 (4ohm; Stereo) 600Wx1 (Bridged 4ohm
• 12V RMS Continuous Power 4ohm; Stereo (0.08% THD) 70Wx2 2ohm; Stereo (0.3% THD) 120x2 Bridged 4ohm; (0.3% THD) 240x1
•14.4V RMS Continuous Power 4ohm; Stereo (0.08% THD) 100Wx2 2ohm; Stereo (0.3% THD) 170x2 Bridged 4ohm; (0.3% THD) 340x1
• S/N Ratio 100dBA
• Frequency Response: 10-50kHz
• 12dB HP/LP Crossover (50-200Hz)
• Speaker Level Input
• Bass EQ Circuit
• Subsonic Filter (15/30Hz)
• Extra Large Gold Plated Terminals with Wire Insert Capability
• Top Panel Power LED
• 4 Volt Input Capability
• Continuously Adjustable Crossovers
• DC Straight, STAR Topology & Duo-B Circuitry
• DC-DC/PWM MOSFET Power Supply
More Features:
General-Amplifiers
* 2/1 Channel Operation
* Adjustable Crossover (LP)
* Auto Overcurrent Protection
* Bass EQ Circuit
* Bass Engine Ready
* DC Straight Design
* DC-DC PWM Power Supply
* Discrete Pre-Amp Stage
* Gold Plated RCA Input Connectors
* Input Mode Selector Switch
* MOSFET Final Outputs
* MOSFET Power Supply
* MultiMode
* One side Terminal Layout
* Phase Selector
* STAR Circuitry
* Solid Copper Bus Bars
* Speaker Level Inputs
* Subsonic Filter
* Top Mounted LED Power Indicator
* This amp is in mint shape $150.00
* Brampton area
05-18-2006, 04:40 AM
#3
Junior GTcars Poster
Join Date: Jan 2006
Location: hamilton
Posts: 317
Rep Power: 675
damn i wish i had the money right now i am running two of those right now on 4 12 inch 1230w's right now but would like two of these amps they are like 5-6 years old and i cant kill these amps bump for awsome price
Thread
Thread Starter
Forum
Replies
Last Post
kingrukus
Car Audio For Sale
2
10-04-2009 10:38 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)