FS: 12" KICKER 05CVR122 Subwoofer in Kicker SoloBaric Enclosure

Reply Subscribe

Thread Tools

Search this Thread

11-07-2005, 11:01 PM

Import_Racer

~~ Hardcore Newb ~~

Thread Starter

Join Date: May 2005

Location: T.O.

Posts: 100

Rep Power: 696

Import_Racer street rep is low. keep going

FS: 12" KICKER 05CVR122 Subwoofer in Kicker SoloBaric Enclosure

I am selling a new woofer in a modified Kicker L5 Solobaric Enclosure. The original enclosure was made to fit the square woofer, but with a slight modification it now houses a NEW Kicker Competition 05CVR122 Subwoofer.

Specs of the woofer are:

Description:

Inverted Structural Dome Polymineral Injection Molded Cone: Remains rigid, and lowers distortion
Rear Cone Brace: Offers unmatched strength and resistance to deformation
Ribbed Santoprene Surround for Linear Cone Motion
Silver-Coated Stamped Steel Basket
Stitched Surround: Ensures the cone and surround won't seperate, even under the highest loads
High-temp Polyimide Film Voice Coil Former
Dual Ultra-Length Voice Coils
Perimiter Venting
Sleeved High-Power Tinsel Lead Wires
Spring Loaded Nickel-Plated Terminals
Authorized Internet Dealer

Subwoofer Specifications:

Subwoofer Size 12"
Impedance: 2 ohms
Dual Voice Coil: Yes
Peak Power Handling: 800 watts
RMS Power Handling: 400 watts
Surround Material: Santoprene Rubber
Sealed Box Volume: 1.0 - 4.6 cu. ft.
Ported Box Volume: 1.75 - 2.25 cu. ft.
Sensitivity: 86.7 dB
Frequency Response: 25 - 500Hz

The sub is very versitile and can be wired at either 1/2/4 ohm impedance to suit ur amp ratings. Currently its wired @ 4 ohm.

I also have an amplifier that will match this system perfectly, and I would highly recommend getting it with this system.

The amplifier is an MTX MXA3002, its a 2 channel amp. It has 1/4 mounting stands broken.

Specs on the amp are:

2-channel car amplifier
» 75 watts RMS x 2 at 4 ohms (150 watts x 2 at 2 ohms)
» 300 watts RMS x 1 bridged output at 4 ohms (4-ohm stable in bridged mode)
» variable high- and low-pass filters (40-350 Hz at 12 dB per octave)
» variable bass boost (0-18 dB at 40 Hz)
» remote bass level control
» Tri-way capable (Tri-Way Crossover required)
» MOSFET power supply
» CEA-2006 compliant
» speaker-level inputs with Smart Engage Auto Turn-on feature (eliminates the need for a remote turn-on connection)
» fuse rating: 40A
» 8-gauge power and ground leads recommended — wiring and hardware not included with amplifier

PRICES:
Sub/Enclosure are worth: ~$200 for the sub and ~$250 for the enclosure, so total MSRP of ~$450.

I am Asking a LOW $220 for the sub/enclosure

COMBO PRICE:

Price for the combo of sub/enclosure and an amplifier is ONLY $380

I am located in Etobicoke, Royal York & Eglinton.
PM or e-mail: andrei_3k@yahoo.com

Seller (Import_Racer), is not responsible for any malfunction of any equipment/car audio that can occur in buyers possesion, nor any damages/incidents/accidents the equipment sold, can do to the vehicle or the operator. It is buyers responsibility to ensure proper mounting/maintanace and operation of the equipment.

Pictures Below speak for themselves...