rudetrini

The amp is about 3 years old and is in perfect working condition and i also have the original box and manual as well.

I'm asking $150 OBO.

contact me at: rudetrini@rogers.com

the amp is rated at 14.4 VDC as follows:

180x1 @ bridged into 4ohms
90x2 @ 2 ohms
55x2 @ 4 ohms

here are the detailed specs from: http://www.lightav.com/car/phoenix/amp.html

* Dual-color LED indicator for power-on and protection
* Muting circuitry for soft turn-on and turn-off
* Fully complimentary output stages
* Advanced overload and thermal protection circuitry
* High current bussbars for all high current, high voltage stages
* PWM MosFet power supply
* Gold plated high current power and speakers terminals Gold plated signal input RCA jacks Unique chrome powder coated finish Die-cast gold plated logo badges Isolated mounting feet QLINKable
* Frequency Response +/-1dB, 20Hz to 20 kHZ
* Signal to Noise Ratio (A-weighted) >100dB
* Max Continuous Bridged Power @ 1% THD 180 watts x 1 into 4 ohms @ 14.4 Vdc Max
* Continuous Power per Channel @ 1% THD 90 watts x 2 into 2 ohms @ 14.4 Vdc Nominal
* Continuous Power per Channel @ 1 % THD 55 Watts x 2 into 4 ohms @ 14.4 Vdc IASCA/USAC
* Power Rating 40 Watts x 2 into 4 ohms @ 12.5 Vdc
* Minimum Load when Bridged 4 Ohms
* Minimum Load per Channel 2 Ohm
* Input Signal Voltage Range 0.1 volts to 2 volts
* Crossover Type Cont. Variable Linkwitz Riley HP,LP
* Crossover Slope 12 dB per octave Crossover
* Frequency Range 30-600Hz F
* Hi-level Input yes
* Bass Boost 0- to +15dB @ 45 hZ
* Power Supply Voltage 10Vdc to 15.5Vdc
* Recommended Fuse 30 amp
* Dimensions 10.13L x 8.50W x 2.10H

pic: