Rockford Fosgate P3001
07-25-2006, 07:53 PM
#1
~~ Hardcore Newb ~~
Thread Starter
Join Date: Jun 2006
Location: BRAMPTON
Posts: 166
Rep Power: 658 
Rockford Fosgate P3001
MINT AMP- ONLY ASKING $175 OBO PM me
Number of Channels 1
Rated Power 150 W x 1 @ 4 Ohms RMS
300 W x 1 @ 2 Ohms RMS
Total Power 300 Watts
Bridgeable No
Crossover Controls High-Pass (HP): 40-400Hz 12dB/octave Butterworth
Low-Pass (LP): 40-400Hz 12dB/octave Butterworth
Tone Controls Bass: 0dB to +18dB @ 45Hz
Signal Input Low level: 1 RCA pair
Signal Output Low level: 1 RCA pair
Power Input Connector Block
Power Wire Gauge 4 AWG
Speaker Output Connector Screw terminal barrier strip
Speaker Wire Gauge 8 AWG to 18 AWG
Heat Sink Type Cast aluminum
Cooling Convection
Remote Controls Punch Bass EQ (included with cable)
Visual Indicators Power On
Signal Level
Thermal Status
Speaker protection
Circuit Topology Class Class-bd
Frequency Response 20Hz to 20kHz +/- 0.5 dB
Dimensions 2.4 x 11 x 11.7 (in)
6.1 x 27.9 x 29.7 (cm)
Weight 11.5 Lbs.
(5.2 Kg.)
bumppp comes with the bass control remote
Number of Channels 1
Rated Power 150 W x 1 @ 4 Ohms RMS
300 W x 1 @ 2 Ohms RMS
Total Power 300 Watts
Bridgeable No
Crossover Controls High-Pass (HP): 40-400Hz 12dB/octave Butterworth
Low-Pass (LP): 40-400Hz 12dB/octave Butterworth
Tone Controls Bass: 0dB to +18dB @ 45Hz
Signal Input Low level: 1 RCA pair
Signal Output Low level: 1 RCA pair
Power Input Connector Block
Power Wire Gauge 4 AWG
Speaker Output Connector Screw terminal barrier strip
Speaker Wire Gauge 8 AWG to 18 AWG
Heat Sink Type Cast aluminum
Cooling Convection
Remote Controls Punch Bass EQ (included with cable)
Visual Indicators Power On
Signal Level
Thermal Status
Speaker protection
Circuit Topology Class Class-bd
Frequency Response 20Hz to 20kHz +/- 0.5 dB
Dimensions 2.4 x 11 x 11.7 (in)
6.1 x 27.9 x 29.7 (cm)
Weight 11.5 Lbs.
(5.2 Kg.)
bumppp comes with the bass control remote
Last edited by carman; 07-25-2006 at 10:25 PM. Reason: Automerged Doublepost
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)