Black Mazda detailed Hamza7
#1
Black Mazda detailed Hamza7
Hello all,
Okay enough chatting let’s START THIS THING
JUSTIN kept his car really clean for me to detail as you will now see
So you guys get the idea, started with a pre rinse
“MOM: Where are you, I need milk from the grocery store.
Me: Mom I’m at a client’s house, detailing his car. I’ll be home tomorrow”
Back to work.
I usually focus on my work, but thanks Justin for taking this picture.
Happy Detailer
Moving onto the exhaust
Foam Cannon Time
Getting all into all the nooks and crannies of this car, Door Jambs, sunroof edges….
Okay enough chatting let’s START THIS THING
JUSTIN kept his car really clean for me to detail as you will now see
So you guys get the idea, started with a pre rinse
“MOM: Where are you, I need milk from the grocery store.
Me: Mom I’m at a client’s house, detailing his car. I’ll be home tomorrow”
Back to work.
I usually focus on my work, but thanks Justin for taking this picture.
Happy Detailer
Moving onto the exhaust
Foam Cannon Time
Getting all into all the nooks and crannies of this car, Door Jambs, sunroof edges….
#2
Re: Black Mazda detailed Hamza7
Justin’s dad watching us work
Authentic Merino wool wash-mitt FTW, only the best for my clients
Using a deironizing gel, to remove the iron particles stuck on Justin’s car. Remember this statement I’ll bring it up again
I use a sponge to it around, before that though. I use a box cutter to grit lines into it. So that dirt particles that may still be present can sucked into their instead of rubbing onto the paint. Detailing on the cheap 101
ing the gel around
Deironized
Here I sprayed some tar remover, I mean industrial strength tar remover. So I wear a respiratory mask for safety.
After that I use clay and clay lube to do a final decontamination on the car for what ever is left.
You just have to gently glide it over the surface, GENTLY!
“Huh, did you say something. Okay back to work”
My Boi is impressed with the shine already, what more can I do to impress him?
Trying to play doctor doctor (taking paint measurements of the car, you know how MUCH paint a Mazda has right)
Polishing prep finally!
Justin takes care of his car, so it was in good condition which means it’s very hard to take the pictures of defects.
Also it was impossible to get a 50:50 shot, here are a few attempts though.
This is the polish side, the right side
Un-polished side, do you guys notice the difference.
Here’s the polished side again
Ohh wait, here’s a good one.
Here’s the side of the hood, yes only a Mazda can we have a “side” of the hood. Damn sharp corners
The eyebrows, because the smiley face wasn’t enough
I took a break polishing, Loose Cannon wanted to rinse his car. Pfff Rinse, we detail here Bay Bee
Authentic Merino wool wash-mitt FTW, only the best for my clients
Using a deironizing gel, to remove the iron particles stuck on Justin’s car. Remember this statement I’ll bring it up again
I use a sponge to it around, before that though. I use a box cutter to grit lines into it. So that dirt particles that may still be present can sucked into their instead of rubbing onto the paint. Detailing on the cheap 101
ing the gel around
Deironized
Here I sprayed some tar remover, I mean industrial strength tar remover. So I wear a respiratory mask for safety.
After that I use clay and clay lube to do a final decontamination on the car for what ever is left.
You just have to gently glide it over the surface, GENTLY!
“Huh, did you say something. Okay back to work”
My Boi is impressed with the shine already, what more can I do to impress him?
Trying to play doctor doctor (taking paint measurements of the car, you know how MUCH paint a Mazda has right)
Polishing prep finally!
Justin takes care of his car, so it was in good condition which means it’s very hard to take the pictures of defects.
Also it was impossible to get a 50:50 shot, here are a few attempts though.
This is the polish side, the right side
Un-polished side, do you guys notice the difference.
Here’s the polished side again
Ohh wait, here’s a good one.
Here’s the side of the hood, yes only a Mazda can we have a “side” of the hood. Damn sharp corners
The eyebrows, because the smiley face wasn’t enough
I took a break polishing, Loose Cannon wanted to rinse his car. Pfff Rinse, we detail here Bay Bee
#3
Re: Black Mazda detailed Hamza7
Do you guys remember, the deironizing gel, well go back up if you don’t.
I asked Loose Cannon if I could use his car as a demo to show you guys what I was talking about
You, guys see those golden rust spots right. Watch this!
The deironizing gel is getting to work and reacting with those iron particles to fully remove them.
Pictures of me polishing
The hood was done, finally. N00bmeister testing the reflection
I think he said it passed
Meanwhile, Justin was talking pictures of the hood because he thought the reflection was crazy cool
I came back the next day to find some wax in s crevice under his wing mirror
That had to go, so I safely removed it a tooth pick wrapped in a MF
Left side polished
Had to get the grease from the keyholes and around the handle as well
Clean
I also got the nail scratches from under the handle
Here I’m inspecting my work by wiping away the polish residue
Weird thing here is I didn’t know I had a bald spot
Dirty
Clean
#4
Re: Black Mazda detailed Hamza7
Some scratches were removed
Gone
Justin had to turn the car around so I took this opportunity to take some pictures
Some more scratches
Gone
More 50:50
After the polishing was complete I rewashed it so I could get rid of the dust that was everywhere.
After that as done, I focused on the exhaust. I polished and protected
LSP of choice was Black Fire Wet Diamond
All buffed off, the tires are white because my favorite tire gel needs to soak into the tire
The reflection of the hood was crazy
You know how it looks all nice outside well that’s just my camera I really don’t know how to work it. This is how it actually was
Okay if you finished all that I want you give yourselves a big pat on the back, I’ll be back at Justin’s tomorrow putting on another layer and then taking some sunny time pictures
Gone
Justin had to turn the car around so I took this opportunity to take some pictures
Some more scratches
Gone
More 50:50
After the polishing was complete I rewashed it so I could get rid of the dust that was everywhere.
After that as done, I focused on the exhaust. I polished and protected
LSP of choice was Black Fire Wet Diamond
All buffed off, the tires are white because my favorite tire gel needs to soak into the tire
The reflection of the hood was crazy
You know how it looks all nice outside well that’s just my camera I really don’t know how to work it. This is how it actually was
Okay if you finished all that I want you give yourselves a big pat on the back, I’ll be back at Justin’s tomorrow putting on another layer and then taking some sunny time pictures
#5
Re: Black Mazda detailed Hamza7
Day 3
I started by giving a second treatment of sealant to the paint around Justin’s car everything except the hood and front bumper was treated.
On the hood, I used a special wax I got from Bryan @ Concours Touch, I hand applied Yes hand applied it to the hood as seen below. Justin made me laugh because he thought I was crazy. He’s like “Why you messaging my car man, it’s weird” I said “Yeah it is”
Here are some sun pictures we took
I started by giving a second treatment of sealant to the paint around Justin’s car everything except the hood and front bumper was treated.
On the hood, I used a special wax I got from Bryan @ Concours Touch, I hand applied Yes hand applied it to the hood as seen below. Justin made me laugh because he thought I was crazy. He’s like “Why you messaging my car man, it’s weird” I said “Yeah it is”
Here are some sun pictures we took
Thread
Thread Starter
Forum
Replies
Last Post
Nikku
Car Care / Detailing / Paint / Visual Mods
3
06-08-2009 09:43 PM
Nikku
Car Care / Detailing / Paint / Visual Mods
6
05-06-2009 01:46 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)