mbs500

what is the easyest way to remove tint

3nidapooh

iTrader: (2)

Get a sharp blade and some soapy water and then follow these instructions:

Cut a notch onto the upper area of the film so that you have a piece to pull. Try to peel the film, it will probably come off in two or three pieces.
Spray the remaining adhesive with soapy water, and scrape the adhesive off with a razor blade, avoiding the edges of the glass until last to keep the blade sharp. You may need to use a few blades as they dull quickly. Finish up with window cleaner and paper towels. Inspect for missed glue (its clear and hard to see)

mbs500

thanksss a lott that was very helpful

agent240sx

Wow thanks... i was just thinking about removing my tint because its getting scratchy. Good to know thanks.

pg29

also if it starts comming off in little pieces, use a hair dryer to heat up the glue and make it easier to pull off.

toofast

and last but not least plug ur nose cause that sh*t stanks