V6Cam

I made a f**k up putting in the white faced guages, i forgot to mark where the neeedles were pointing before removing them from the car...is there anything that i can do, where are the needles suppose to be...Help Please

Str8upChevy

Wow Tom, that was certainly the biggest No-No when it comes to doing this mod. I'm not sure if our cars are similar when it comes to needle position with the key being turned to the Accessories, (ie. tach, speedo, volts, oil pressure positions) but if they are......I still have my pictures that you could go by.

Now when it comes to the position of your Gas Gauge.....you have no choice but to give it your best guess, or fill your tank and set it about an 1/8 of an inch above the full mark. I'd definitely make sure you never let it go below a 1/4 tank to put gas it again, cuz without knowing exactly where it was, you're SOL.

Here's a quick look at these pictures that I have if you want, but you'll need to ask around (Dealership ect...) and see what they say.

THESE ARE WITH THE CAR COMPLETELY COLD AND IN THE ON POSITION
(Sorry about the third one being blurry, but it still shows where the temp gauge is at cold)

V6Cam

Well i got it to be about 90% perfect...i knew where the needle is all the time when its full, so i filled it and placed the needle there...

Str8upChevy

Right on......but I still wouldn't chance letting your gas gauge get too low. I never let my car get lower than a 1/4 tank for two reasons: One, I never have to worry about running out......and two, letting it get too low can cause all the crap in the bottom of the tank to clog up your fuel filters.

Were you able to get all the other needles on in the right place? When you get it finished, make sure you post up some pictures!!

V6Cam

i need to get a new floppy for the comp, because i need a floppy drive to use the flash path, to transfer the pics, so, it may be some time...

Str8upChevy

Well, not knowing that much about what you just said.......would make any difference if I emailed them to you?

V6Cam

no i was saying that for my pics to show the pics of the gauges, i was just saying the program i use needs the floppy drive and my floppy drive is broken