Pics of the WILWOOD 4 piston rear, BMR Extreme LCA, BMR upr & lwr panhard
#1
Pics of the WILWOOD 4 piston rear, BMR Extreme LCA, BMR upr & lwr panhard
I finally compiled some pics of the rear 4 piston WILWOOD 2 piece kit. I have more pics I will post later, but wanted let everyone see that the car is finally back together as far as brakes are concerned . Also, I have included some pictures of the BMR EXTREME LCA's and the BMR ADJ. lower & upper panhard rods
You can also see the Endlink bracket mounted to the body has been silver chrome powdercoated for a nice detail touch (PIC 2). I have also replaced 95% of all the suspension bolts on the entire bottom of the car with Zinc DiChromate (yellow gold finish) GRADE 10.9 another nice little detail touch. It is hard to appreciate the bolts in a pic so that is why I did not post any. Oh yea, I also chromed the U-Bolts & U-bolt bracket (you can see if you look close) I know, blinged brackets what in the world am I thinking
Enjoy, I will have more pics to post next week....
You can also see the Endlink bracket mounted to the body has been silver chrome powdercoated for a nice detail touch (PIC 2). I have also replaced 95% of all the suspension bolts on the entire bottom of the car with Zinc DiChromate (yellow gold finish) GRADE 10.9 another nice little detail touch. It is hard to appreciate the bolts in a pic so that is why I did not post any. Oh yea, I also chromed the U-Bolts & U-bolt bracket (you can see if you look close) I know, blinged brackets what in the world am I thinking
Enjoy, I will have more pics to post next week....
#5
That is pretty much the only thing I have not done. Cam / Heads / FI. I really have been waiting to figure out which one I want to do. The car has about every other imaginable mod, LOL
#7
BMR 21mm rear bar, BMR Red Springs are in the pic, but I have just about got those springs out of the car. I have a the HAL 150 lb linear rates for the rear and I have also removed the HAL 12 way shock in place of the HAL 12 way adjustable coilover setup for the rear. I already have the HAL front setup and will be putting in my HAL front Springs ( 300 lb Linear rate ). Front bar is the BMR Red 32 MM.