Polishing a Weiand intake
#1
Polishing a Weiand intake
I am in the process of polishing an intake for a friend, here are some before pictures and progress pictures. I have only done the top portion so far, he told me he didn't care too much about the injector areas since they aren't very visible once installed. I plan to hit them some but they won't shine like the top. Below are the steps I used to get to this point so far.
Started with steel wool
Wet sanded with 320 grit
Wet sanded with 1000 grit
Wet sanded with 2000 grit
Hand polished with Simichrome
Before:
After:
Started with steel wool
Wet sanded with 320 grit
Wet sanded with 1000 grit
Wet sanded with 2000 grit
Hand polished with Simichrome
Before:
After:
#9
eh ive so wanted to venture into the world of polishing stuff but the camaro is still my DD and it will be so hard to polish things and get them backon when i need the car.. plus then having to clean and polish and shine them all the time on the car.. my car has way too mny other problems right now..
Thread
Thread Starter
Forum
Replies
Last Post
imported_2fast4u
Car Care / Detailing / Paint / Visual Mods
6
05-01-2005 02:31 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)