* 81 Pictures Added, Price Lowered *

Reply Subscribe

Thread Tools

Search this Thread

04-22-2005, 06:54 PM

revitup

~~ Hardcore Newb ~~

Thread Starter

Join Date: Mar 2005

Posts: 23

Rep Power: 701

*** 81 Pictures Added, Price Lowered ***

MINIMUM 50$ VALUE PURCHASE REQUIRED FOR THESE REDUCED PRICES. THESE PRICES HAVE BEEN DROPPED EXTREMELY LOW TO SELL FAST, SO MINIMUM ORDERS OF 50$ AT THESE PRICES ARE REQUIRED FOR ME TO MAKE IT WORTHWHILE TO SELL STUFF THIS CHEAP AND GET RID OF LOTS OF THINGS. I WILL SELL INDIVIDUAL ITEMS, BUT THE EXTREMELY LOW SALE PRICE WILL NOT APPLY AND A DIFFERENT HIGHER PRICE CAN BE NEGOTIATED WITH ME OR OFFERS MADE.

D16=SOHC Civic 1.6L and D16Z6=92-95 Civic Si

D16 Clutchmasters clutch for all 92-95 1.6 litre civics, Stage 3 single disc, steel backed segmented racing Carbon-Kevlar friction material, Dual Sprung hub with cushioned disc, heavy duty street and race system, reinforced pressure plate, hi-leverage pressure ring design, virtually no wear, excellent condition, used for 3000km last summer. 300$

http://www3.sympatico.ca/torquemonst...tchmaster2.jpg
http://www3.sympatico.ca/torquemonst...tchmaster3.jpg
http://www3.sympatico.ca/torquemonst...uthmaster4.jpg

J.E. Pistons: Custom built D16Z6 race pistons, zero-silicon aluminum turbo pistons built for 9.2:1 compression, able to handle up to 40 PSI of boost, lightweight aluminum for less rotating mass and faster revving, pistons are 240 grams each and matched for weight Part # 193607 (SPECS: bore=2.963, stroke=3.543, flat top, comp. dist = 1.181, compression ration 9.2:1, Intake 0.220 measured from deck, Exhaust 0.155 measured from deck, groove top 0.040, groove 2nd 0.048, groove bottom 0.111, land top 0.28, land 2nd 0.165, land bottom 0.09, pin diameter 0.748, pin length 2.25, Dbl Spiro locks,. Set clearance to 0.004, measure clearance 0.5 from bottom of piston skirt,) set is including JE piston rings. Used for only 5000km. Selling set of 3, contact for details, I have all the exact specs so that the other 1 can be ordered. Selling 3 JE pistons, just 40$ (must buy with Eagle rods)

http://www3.sympatico.ca/torquemonst...tonsSpecs.jfif
http://www3.sympatico.ca/torquemonst...e/jeeagle2.jpg
http://www3.sympatico.ca/torquemonst...agleclose1.jpg
http://www3.sympatico.ca/torquemonst...agleclose2.jpg
http://www3.sympatico.ca/torquemonst...jeeaglecap.jpg

Eagle Connecting Rods, D16Z6 Race Rods, designed for handling high boost or NOS and high rpms “ESP” forged steel H-beam design, part # CRS5394H3D,(SPECS: C-C length 5.394”, total weight 510, rotating weight 371, recipr weight 139, bolts 5/16” ARP 2000, Torque 28 ft/lbs w/ARP moly, bolt stretch 0.0048”-0.0052”,) Matched for weight, handles 35+ PSI and 10000+RPM. Selling set of 2, contact for details, I have all the exact specs so that the other two identical ones can be ordered, selling two Eagle forged Connecting Rods, just 40$ (must buy with JE pistons)
http://www3.sympatico.ca/torquemonst...odsspecs2.jfif
http://www3.sympatico.ca/torquemonst...e/jeeagle1.jpg
http://www3.sympatico.ca/torquemonst...e/jeeagle2.jpg
http://www3.sympatico.ca/torquemonst...agleclose1.jpg
http://www3.sympatico.ca/torquemonst...agleclose2.jpg
http://www3.sympatico.ca/torquemonst...jeeaglecap.jpg

Chipped P28 ECU, save tons of money on labour installing your own soldering your own piggyback into the motherboard and installing chip, already done for you, ECU plus socket only 200$

D16Z6 dipstick, metal part is in perfect condition, the rubber circle grip is blackened and not good condition, but it still works fine, just doesn’t look pretty, 5$
http://www3.sympatico.ca/torquemonst...e/dipstick.jpg

MSD RPM modules / pills for the MSD 6 series ignition or shift light, plug n’ play for your engines rev limit or for setting your shift light, 7000, 7200, 7400, 7600, 7800, rev/shift limits available. 10$ each/ OR 25$ for all of them/ OR TRADE for an 8000 or 8100 or 8200 or 8300 or 8400 RPM pill
http://www3.sympatico.ca/torquemonst...le/msdpill.jpg
http://www3.sympatico.ca/torquemonst...e/msdpill2.jpg

Civic or Integra adjustable springs coilovers, two are Tom’s and two are Dropzone (used different brands to get the front/rear spring rates for desired oversteer characteristics) 450springrate rear, 600springrate front, adjust ride height from stock to 5 inch drop, 200$

D16 alternator belt, 5$,
http://www3.sympatico.ca/torquemonst...rnatorbelt.jpg

AC Delco battery, 5 years old, still works, fits civics, integras, etc. Feel free to test it before you buy just so you are satisfied it works. 15$
http://www3.sympatico.ca/torquemonst...le/battery.jpg
http://www3.sympatico.ca/torquemonst...e/battery2.jpg

Acura ‘A’ symbol centre caps for rims from Integra Type-R ITR, 4 of them, mint condition, 60$ for all of them
http://www3.sympatico.ca/torquemonst...centrecaps.jpg

D16 Driver side OEM rear rubber fender protector, looks like a thin long 2ft piece of rubber that presses onto the edge of your fender, protects the edge of the fender liner from getting chipped and developing rust 5$
http://www3.sympatico.ca/torquemonst...cruisewire.jpg

D16Z6 full power steering rack, 40$
http://www3.sympatico.ca/torquemonst...eringrack1.jpg
http://www3.sympatico.ca/torquemonst...eringrack2.jpg
http://www3.sympatico.ca/torquemonst...eringrack3.jpg
http://www3.sympatico.ca/torquemonst...eringrack4.jpg

Perfect working Master Cylinder, Booster and Proportioning Valve OEM from 92-95 Civic Si. ONLY 100$ for EVERYTHING above

92-95 Black Civic Dashboard....includes the large main entire dashboard (all clusters, gauges, airbags, etc. removed), the grey plastic console that goes around the steering wheel area (the piece that has the buttons for cruise control, fog lights, blanks, etc), the black lower console (that has ashtray, cointray, lighter, etc). 50$ for everything, or 20$ per each of the 3 pieces

http://www3.sympatico.ca/torquemonst...ashconsole.jpg
http://www3.sympatico.ca/torquemonst...shconsole2.jpg
http://www3.sympatico.ca/torquemonst.../dashalone.jpg

OEM Valve cover, Black, VTEC, excellent condition, nice BLACK finish and Honda H logo and HONDA written across it 50$

partsforsale@lycos.com

04-22-2005, 06:55 PM

revitup

~~ Hardcore Newb ~~

Thread Starter

Join Date: Mar 2005

Posts: 23

Rep Power: 701

continued....

D16Z6 intake manifold INCLUDING IAC valve, (seen with throttle body) 40$

http://www3.sympatico.ca/torquemonst...nifoldrear.jpg

D16Z6 fuel rail, 10$
http://www3.sympatico.ca/torquemonst...e/fuelrail.jpg

D16Z6 throttle body, (seen on intake manifold) 10$
http://www3.sympatico.ca/torquemonst...kemanifold.jpg

D16 fuel injectors 10$
http://www3.sympatico.ca/torquemonst...linjector1.jpg

D16Z6 VTEC cam gear 5$
http://www3.sympatico.ca/torquemonst...le/camgear.jpg

D16 shift linkage 10$
http://www3.sympatico.ca/torquemonst...eringrack5.jpg

Heatshield for D16 exhaust manifold, 5$
http://www3.sympatico.ca/torquemonst...manishield.jpg

D16 Head studs and head bolts OEM, complete set 5$
http://www3.sympatico.ca/torquemonst...boltsstuds.jpg

D16 OEM stock pistons and D16 OEM stock rods, perfect working condition, buy together as set, pistons originally 9.2:1 in D16Z6 engine, higher compression when put in D16Y8 engine, buy piston and rod set for 25$

AEM license plate cover, black with white writing, brand new and never used, 5$
http://www3.sympatico.ca/torquemonst...aemlicense.jpg

D16 or B16 or D15 or B18B special distributor cap and rotor for mandatory use with MSD ignition setup, a cap and rotor that has 5 plug wire inputs (4 for your spark plug wires, 1 for your MSD ignition external coil), a necessity to run an MSD 6A, MSD 6AL, MSD 6BTM,etc. with an external coil setup, excellent condition 25$

D16 fuel pump, perfect working condition, the fuel pump filter I'll throw in for free, 20$

Honda "H" red badge, 10$
http://www3.sympatico.ca/torquemonst...hondabadge.jpg
http://www3.sympatico.ca/torquemonst...ondaemblem.jpg

Spark plug gapping tool, gap your plugs to the perfect gap and adjust them for optimal power for your modifications, also confirm they are factory set correctly 5$

Mint condition D16 stock intake box, intake resonator, and intake piping, including filter (alone worth over 10$) selling all for 20$

Steering wheel, from a 92-95 D16 but will fit any D series or B series, mint condition steering wheel with undeployed airbag and cartridge still in it, steering wheel and airbag sold to you for 50$