B-series Partout....aem Itr| Hondata Gasket| Hastings Rings| Ctr Pulley| B18b Engine
04-05-2007, 11:30 AM
#1
Average GTcars Poster
Thread Starter
Join Date: Apr 2005
Location: london ontario, canada
Posts: 430
Rep Power: 0 
B-series Partout....aem Itr| Hondata Gasket| Hastings Rings| Ctr Pulley| B18b Engine
HONDATA B18A/B18B INTAKE GASKET---BRAND NEW
$70.00
HASTINGS B-SERIES PISTON RINGS---BRAND NEW
-Perfect piston rings for a rebuild and they have a very high reputation. THEY WORK ON ALL B-series 1.8L engines!
$120.00
CTR N1 Crank Pulley --- USED BUT IN MINT CONDITION
-Bought on any B-series engine...runs only alternator belt and weighs about 2lb as opposed to a factory 4lb pulley
$80.00
AEM ITR 3" intake---USED BUT STILL IN GOOD CONDITION
-Bought this for my engine, Works on ANY B-series setup and is a 3" diamater piping. This intake is specifically made for the Integra Type-R but it out-flows the J's racing intake
HERE IS A DYNO CHART COMPARING THE AEM ITR INTAK TO J'S INTAKE
Honda-Tech.com: All Motor: Dyno results J's racing Intake vs. AEM CAI on my ITR! J's intake racing all hype?
$160.00 FIRM
1996 B18B Engine only, NO DIZZY/ALTERNATOR/TRANNY...ONLY ENGINE + INTAKE MANFOLD --- 219XXX KM RAN FINE IT WAS PULLED.. was pulled due to owner putting in a newer b18b from a 2000 integra
-NOT a stolen engine...anybody that knows me knows I have legal parts!!!!!
-Engine burns a bit of oil...but nothing major.
$300.00 OBO!!!!
.
.
.
.
.
Located in London Ontario
Will ship at buyers expense
PM for quick response OR email
mugen_r85@Hotmail.com
$70.00
HASTINGS B-SERIES PISTON RINGS---BRAND NEW
-Perfect piston rings for a rebuild and they have a very high reputation. THEY WORK ON ALL B-series 1.8L engines!
$120.00
CTR N1 Crank Pulley --- USED BUT IN MINT CONDITION
-Bought on any B-series engine...runs only alternator belt and weighs about 2lb as opposed to a factory 4lb pulley
$80.00
AEM ITR 3" intake---USED BUT STILL IN GOOD CONDITION
-Bought this for my engine, Works on ANY B-series setup and is a 3" diamater piping. This intake is specifically made for the Integra Type-R but it out-flows the J's racing intake
HERE IS A DYNO CHART COMPARING THE AEM ITR INTAK TO J'S INTAKE
Honda-Tech.com: All Motor: Dyno results J's racing Intake vs. AEM CAI on my ITR! J's intake racing all hype?
$160.00 FIRM
1996 B18B Engine only, NO DIZZY/ALTERNATOR/TRANNY...ONLY ENGINE + INTAKE MANFOLD --- 219XXX KM RAN FINE IT WAS PULLED.. was pulled due to owner putting in a newer b18b from a 2000 integra
-NOT a stolen engine...anybody that knows me knows I have legal parts!!!!!
-Engine burns a bit of oil...but nothing major.
$300.00 OBO!!!!
.
.
.
.
.
Located in London Ontario
Will ship at buyers expense
PM for quick response OR email
mugen_r85@Hotmail.com
04-14-2007, 02:06 PM
#6
Average GTcars Poster
Thread Starter
Join Date: Apr 2005
Location: london ontario, canada
Posts: 430
Rep Power: 0
Aem Itr Intake + Obd-2 B18b Fs!!!!!!!!!!!!!!!!!!!
Originally Posted by mr.rhtuner
AEM ITR 3" intake---USED BUT STILL IN GOOD CONDITION
-Bought this for my engine, Works on ANY B-series setup and is a 3" diamater piping. This intake is specifically made for the Integra Type-R but it out-flows the J's racing intake
HERE IS A DYNO CHART COMPARING THE AEM ITR INTAK TO J'S INTAKE
Honda-Tech.com: All Motor: Dyno results J's racing Intake vs. AEM CAI on my ITR! J's intake racing all hype?
$160.00 FIRM
1996 B18B Engine only, NO DIZZY/ALTERNATOR/TRANNY...ONLY ENGINE + INTAKE MANFOLD --- 219XXX KM RAN FINE IT WAS PULLED.. was pulled due to owner putting in a newer b18b from a 2000 integra
-NOT a stolen engine...anybody that knows me knows I have legal parts!!!!!
-Engine burns a bit of oil...but nothing major.
$300.00 OBO!!!!
.
.
.
.
.
Located in London Ontario
Will ship at buyers expense
PM for quick response OR email
mugen_r85@Hotmail.com
-Bought this for my engine, Works on ANY B-series setup and is a 3" diamater piping. This intake is specifically made for the Integra Type-R but it out-flows the J's racing intake
HERE IS A DYNO CHART COMPARING THE AEM ITR INTAK TO J'S INTAKE
Honda-Tech.com: All Motor: Dyno results J's racing Intake vs. AEM CAI on my ITR! J's intake racing all hype?
$160.00 FIRM
1996 B18B Engine only, NO DIZZY/ALTERNATOR/TRANNY...ONLY ENGINE + INTAKE MANFOLD --- 219XXX KM RAN FINE IT WAS PULLED.. was pulled due to owner putting in a newer b18b from a 2000 integra
-NOT a stolen engine...anybody that knows me knows I have legal parts!!!!!
-Engine burns a bit of oil...but nothing major.
$300.00 OBO!!!!
.
.
.
.
.
Located in London Ontario
Will ship at buyers expense
PM for quick response OR email
mugen_r85@Hotmail.com
Thread
Thread Starter
Forum
Replies
Last Post
mr.rhtuner
Car Parts For Sale
3
06-28-2007 03:03 PM
mr.rhtuner
Car Parts For Sale
9
04-04-2007 02:53 PM
yokosi
Car Parts For Sale
8
08-16-2005 08:57 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)