b-series vtec cams, valve train, FMIC, chipped ecu, b20vtec stuff
11-02-2006, 07:43 PM
#1
b-series vtec cams, valve train, FMIC, chipped ecu, b20vtec stuff
WILL PART CAMS AND VALVETRAIN FROM HEAD
I'm selling my engine, i've put 40,000 kms on it since i've owned it (mileage
before that is unknown b/c i got it from an importer). I put a new timing belt and water pump on it shortly after i got it. And just put a new timing belt on it about 500kms ago.
Its a second gen b16. The head has been ported and polished, has a 3 angle valve job and has been milled .030" and new honda valve seals, all work was done by Gord Bush Performance.
It has crane stage 2 cams, crane dual valve springs and titanium retainers, ferria valve locks, Venom adjustable cam gears, the valve cover has been cut to access the gears, and aftermarket cam seal. The block has ARP head studs doesn't burn any oil and runs mint.
$700 for cams, valve springs, titanium valve spring seats, titanium retainers and ferria valve locks (required with these retainers).
$700 for the head with stock b16 cams, valve springs and retainers, will include intake manifold, throttle body and valve cover.
The engine is still in my car so you can see how well it runs. I will include the chip i made on the dyno when it made 167.7whp (i have the dyno sheet to prove it). I can provide a chipped p28 with my dyno tuned program in it for an additional $100.
I am asking $1300 for just the head (no dizzy b/c its hard wired into my wiring harness or exhaust manifold) with everything but what i've mentioned included. Or $1500 for the head and block (assembled).
I have pics, but if you know what an engine looks like, you know what this one looks like. You can come see it run. But please no tire kickers, serious buyers only.
I also have:
front mount intercooler (mounted but never used)
25" x 9" x 2.5"......$250
Chipped p28 with xenocron USB datalogging cable (setup to datalog with cromepro, ecu control, digital dash)...$200
Chipped p28.....$160
Brand new Obd2a-obd1 ecu conversion harness.....$100
Brand new 84mm (b20) OEM honda headgasket....$80
Brand new Golden Eagle ls/b20vtec conversion dowell pins....$25
Located in hamilton
PM me or email....z_manith@hotmail.com
Or call
905-578-5707
Andrew
I'm selling my engine, i've put 40,000 kms on it since i've owned it (mileage
before that is unknown b/c i got it from an importer). I put a new timing belt and water pump on it shortly after i got it. And just put a new timing belt on it about 500kms ago.
Its a second gen b16. The head has been ported and polished, has a 3 angle valve job and has been milled .030" and new honda valve seals, all work was done by Gord Bush Performance.
It has crane stage 2 cams, crane dual valve springs and titanium retainers, ferria valve locks, Venom adjustable cam gears, the valve cover has been cut to access the gears, and aftermarket cam seal. The block has ARP head studs doesn't burn any oil and runs mint.
$700 for cams, valve springs, titanium valve spring seats, titanium retainers and ferria valve locks (required with these retainers).
$700 for the head with stock b16 cams, valve springs and retainers, will include intake manifold, throttle body and valve cover.
The engine is still in my car so you can see how well it runs. I will include the chip i made on the dyno when it made 167.7whp (i have the dyno sheet to prove it). I can provide a chipped p28 with my dyno tuned program in it for an additional $100.
I am asking $1300 for just the head (no dizzy b/c its hard wired into my wiring harness or exhaust manifold) with everything but what i've mentioned included. Or $1500 for the head and block (assembled).
I have pics, but if you know what an engine looks like, you know what this one looks like. You can come see it run. But please no tire kickers, serious buyers only.
I also have:
front mount intercooler (mounted but never used)
25" x 9" x 2.5"......$250
Chipped p28 with xenocron USB datalogging cable (setup to datalog with cromepro, ecu control, digital dash)...$200
Chipped p28.....$160
Brand new Obd2a-obd1 ecu conversion harness.....$100
Brand new 84mm (b20) OEM honda headgasket....$80
Brand new Golden Eagle ls/b20vtec conversion dowell pins....$25
Located in hamilton
PM me or email....z_manith@hotmail.com
Or call
905-578-5707
Andrew
Thread
Thread Starter
Forum
Replies
Last Post
zman
Car Parts For Sale
5
11-19-2006 12:56 PM
Mr.Civic
Car Parts For Sale
4
02-18-2006 11:31 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)