N1_Evo

*****Get going with this stuff*****
EG cluster with no tach off manual..26x,xxx kms $20 firm

Sparco REV seat in blue colour. In good/ok condition. Little dirty but can be cleaned...Small part of cloth is ripped and cloth is starting to come off the bolsters. No rails or sliders. Come take a look @ it..Great for driving purposes still. $175 firm.

Del Sol seats with red stripe in the middle..in vg condition...$250 Firm

Set of Falken RT215s size is 215/45/16s...These were used on the TE-37s selling below**taken off**. Used like a 1.5mths in total...Still like new. a pair has about 75-80% and the other is like 90-95% treadear left.. $600 FIRM

Set of 16" Knockoff TE37s in white...Bolt pattern is 16 x7 offset 42. I believe this are the Racing Power wheels or Rota Grids. They are in very good condition and been used only for about 1.5 mths in total..If interested come take a look. $575 Firm.

Set of 16" Kosei K1 Wheels in gunmetal colour. Bolt pattern is 5 x 114.3 and offset is +43. Great for 5 Bolt conversion civics, tegs. Will fit as well, Accords and Ludes that have 5 bolt. These are in very good condition with mini. flaws on them from moving them around. Used like a 1.5 mth in total. They are original and I believe discontinued. $600 firm
[image]http://img.photobucket.com/albums/v328/NiceTry/parts/05-11-05_1339.jpg[/image]

Fresh rebuilt DOHC ZC motor..The head was shaved for more power. Whats included with this motor is a new timing belt, water pump, and head gasket. This motor will run mint with the car im selling below. Installation can done of course extra. $500 is the price. Parts alone is $300+ dollars.

I have as well a RED EF 89'Si hatch for sale(Blown motor). Condition of it is in good condition. Cancer is mainly on the rear quarters, some near windshield and paint is dull as well..figures. Good for a lapping day or a daily driven car. There is rust around the quarters and paint is dull since it is red. Some parts are missing like dizzy and heat vents in centre console. Car is well worth it, has 14" steelies on it..That is worth $100 bucks there and any wreckyard will give at least $50-$100 for as scrap metal. If your interested, please come take a look. $300 firm.
[image]http://img.photobucket.com/albums/v328/NiceTry/JDM%20ITR/ef2.jpg[/image]
[image]http://img.photobucket.com/albums/v328/NiceTry/JDM%20ITR/ef5.jpg[/image]
[image]http://img.photobucket.com/albums/v328/NiceTry/JDM%20ITR/ef1.jpg[/image]

Mugen bucket seat sidemounts for RSX. Its used Red in colour. Has to be used with Recaro rails unless modified to fit other applications. Stores sell it for $200 USD.. $120 FIRM

Mugen Baseblock Fuel Pressure Regulator for RSX. Never used and still have the box. $130 FIRM.

RSX OEM springs. Used. $50 FIRM

AEM Intake for a 350Z...In vg condition and its going.. Only minor flaw on it but it will be fixed upon purchasing. $150 obo.

94-01' Integra A-dual pillar gauge that comes with a Autometer Carbon Fiber A/F ratio..needs a good home. hehe. $70 firm for both..

04" 17" Mazda 3 wheels and tires. In vg condition with about 70% treadwear on all four tires. $650 firm

JDM ITR CF Type R Interior pieces (Includes Center Vent, shifter piece, side vents, and pwr window pieces.) Looks great. $230 FIRM


Sorry, I have some pics but your welcome to come take a look. The car are not being parted-out as otherwise just only the parts that have posted up alone. Car is located in the N.Scarbs area. As usual, please pm or email me for more info. Thanks for your time and once again, and low ballers will be ignored.

JDMDC2R

iTrader: (1)

So how much for the Kosei K1 rims? any major dents, scratches, etc?

N1_Evo

$600 for the rims only. They are gunmetal and nothing major..just tiny minor flaws..Best if you come in person too see them..Really nice. Im located in the Scarborough area. Take care.


Updated the post/thread....Thanks..