####Garage sale!!!!####
 

Garage sale!

--------------------------------------------------------------------------------

Got a bunch of things I need to get rid of here. Most is not including shipping unless otherwise noted. Feel free to make offers too. Please PM me or e-mail me with questions/offers.

MeenZ28@ProjectCamaro.com

------------------------------------------------------------------------

Used 4l60e 4 speed automatic out of my 1996 Z28. Complete with stock torque converter. In need of a rebuild. The clutches in the 3rd and 4th gear had burnt up. When shifting from second to third it feels like it goes into neutral. That’s all that’s wrong with it. You replace the clutches it should be go to go. I'd prefer a local pick-up but it's sitting on a pallet and can be shipped if you handle the arangements/cost.
$100.00

Set of 2 chome Z28 style exhaust tips. Never installed. Center inlet design as opposed to the offset factory inlet.
SOLD

MSD 6al ignition control box. Used for only about 20 miles (no joke). All wireing included with the MSD 96+ GM harness (you typically have to buy these seperatly). I will include 1 RPM pill at 6000 all 4 rubber shock mounts and the original box.
SOLD


Set of 2 red front floor mats with a black embroidered 69’ style Z28 logos. Mats are in good condition but not perfect. Has wear on driverside one from use. Still look very nice and clean. No stains that I can see.
$20.00


Taylor Spiro Pro red universal 8mm plug wires. 90 degree boot. Was for a V8 but I used 2 wires so can very easily be usfull for a V6 guy/girl. Comes with box, plug ends (2 sets 90 degree and HEI style), metal connectors.
$40.00 OBO

White face gauges with red digits. for 93-96 Z28 (150mph speedo) digits will light up red at night. Made by APC. Brand new never installed. Still even has the paper backing.
SOLD

Black face flame gauges white digits. Digits light up blue at night. for 93-96 Z28 (150mph speedo). Flames will glow red and orange as well. Very eye catching. Made by NuImage. Used. (please note:the flame gauges are still on my car and I wont be able to ship till my new gauges come in. So if interested, please be pacient)
Sold

Felpro LT-1 Intake manifold gaskets. Brand new in box. Bought these to take my manifold off to paint it red - decied to paint it without removing it so never had to use them.
SOLD

Mr. Gasket Co. LT1 Exhaust manifold gaskets. Brand new in box. Came with my headers but i got differant gaskets at the same time so never used these.
Make offer
http://www.projectcamaro.net/gallery...forsale004.jpg

RS 3-piece spoiler. Adds on to the stock spoiler. Will not fit SS spoiler. Very used. Not in good condition. Painted black but paint is oxidizing in places. Will need to be stripped and repainted. I'd imagine you'd want to do this anyway since there's a huge piece of red vinal on the large piece that I tried to get off with little luck. Also - the passener side end piece (smaller piece) has a chunk taken out of it from the accedent. Nothing a good body shop couldnt fix at the same time as paint. I'm sure pics of this will be needed - just ask. These spoilers go for well over $200.00 on Ebay all the time, this is a good deal.SOLD

10" Obital polisher. Comes with 2 buffer pads. Very strong. Only used like 3 times.
Sold

Bolt in hood pins. Professional style. Brand new in box. Same kind that i was using on my car to aline the hood before the paint and body got done with the 98+ front end. So I can promise they are very strong. Bought a second set to use after the car was painted but the shop filled the holes - I didnt feel brave enough to drill threw new paint. Primer black gel coat - yes, brand new paint - no.
$15.00 OBO

There might be more things for sale but this is it for now (Unless someone wants to make me an offer on the Camaro..... j/k
kinda)

;) you have an email!

Why u kinda want to sell the maro?

All interested parties have been responded to. Let me know guys.

Adric, it's a joke.

I'm just getting tired of things going wrong with the car. I couldnt sell her if i wanted to you know that. But its just a little hard when I've only been able to drive her a total of maybe 50 miles for the last 9 months.

Yes I know how you feel grant sorta, my cars been sitting in a garage since may 06` when I joined the Army, And there is no way id ever drive it out here to kansas from pennsylvania because it sucks *** on the highway with the high stall I have its just a slow cruiser or WOT drag car. Its hard at times not to just sell it and get some extra cash but I cant seem to bring myself to part with it.

Deals fell therw on the gaskets so they're still up for grabs.

TTT for today.

Deal still pending on the rs spoiler? I'd like to see some pictures, if its still for sale. This is the kind that you drill holes to mount, correct?

Yes you would have to drill holes. It's genuine GM part. It's basically sold though, I'm just waiting for the guy to Paypal me.

MSD 6al ignition control box. Used for only about 20 miles (no joke). All wireing included with the MSD 96+ GM harness (you typically have to buy these seperatly). I will include 1 RPM pill at 6000 all 4 rubber shock mounts and the original box.
$190.00 OBO

Pics to Nirvanaking3de@yahoo.com breh!

Pics sent Tony, let me know.

Hey can I get pics of the Chrome Exhaust Tips? I might be interested. I have the black ones.

http://www.projectcamaro.net/gallery...forsale012.jpg
http://www.projectcamaro.net/gallery...forsale013.jpg

Opening is 7 3/4" by 2 1/4" and its about 10" long with a 2 1/2" inner diameter opening.

Those are nice, I will hav to talk to my fasher about that one, you can take the stock tips off with out anycutting right?

I dont know about that. But remember, the stock tips, the inlet is offset. here I'll show you...
https://i9.ebayimg.com/04/i/000/96/c5/f9e8_1.JPG

So it's not a direct swap. You'd have to re=pipe a little from the muffler forward. I bought these to do my side-exiting idea way back when so the whole thing was going to have to be redone anyway - wasnt a bid deal for me. Just thought I'd give you a heads up. Let me know.

Yea I dont think I will be able to, id have to cut off the stock tips, I don't have the tools, (welding) to do it. dam those would look so sick though...

ttt

Did you ever sell the RS spoiler?

Never heard from the guy. So no it's still up for grabs.

i might be interested in the 6AL. did you notice a difference at all? and is it as simple as i think? that harness simply bolts into the coil and factory coil harness?

It's almost as as simple as that. You plug it in, ground one wire, and tap the other wire to the positive terminal of the battery. I noticed a significant differance. And I love the rev limiter. I wish I didnt have to let it go to be honest but I'll get one again later on. I need the money now more than anything.

So how much does this rev limiter go to, 6200rpms? Is it a preset one or can you set it up yourself?

It's based on the plug in moduals. You can set it to whatever you want as long as you have the coasponding moduals. I have the 6000 RPM, 7000 RPM, and 8000 RPM that will come with it... although I'm not sure how much good the 7000 or 8000 will do you since we redline at 7000 but there you go. Other RPMs can be purchaced from MSD

yea What Im going to end up doing is buying heat resistance black paint, Clean the Tips, repaint them to look brand new again, thats what my fasha told me I should do, to keep them nice looking, later down the road I will have to buy new exhuast, it sucks, because I love those tips.

i am interested in the ignition....is that for the 8 or is it for a 6....and what difference would you say it makes??

It's made for an 8. You'd have to cut a wire to make it work for a 6 and I haven't done that (why would I?). It makes a major differance. Throttle responce is better, idles smoother, and the rev limiter makes it so you aint going to red line the car to death. I think Tony is interested in it though. If he doesnt' want it (or you can offer better than $200 shipped) well figure it out.

ok i'll wait to see what happens with tony. im only semi interested at this point. i got that 500 bucks sittin here and i need front brakes. i might be using that money for the LS1 front brake swap so if i do that i'll use the leftover for that MSD.

and to help out the guy who wants it for his 6...you need the DIS-4 from MSD. then you need three coil interface modules. its a lot more expensive for the 6ers.

We can cincider the white face gauges spoken for, just waitin on the money. Everything else still avalible.

ahh grant sorry, if some1 wants it dont wait for me im still waiting for my state check as my fed just went to baby bills and a new hoodie for the gf.

See thats just it, I thought this thing would be the first to go, but you and only like one other person has even asked about it. It's cool Tony, I know money's tight these days, but it blows when you're between jobs.

pm sent

PM replied to

sent another one back to ya.

Spoiler sold. Everything else still up for grabs.

ttt

OK, spoiler sold and offically shipped. It's outa my hands.

Everything else is still up for sale. Would be willing to concider trades for a set of injectors for a 96 LT1 *hint* *hint*

still waiting for tax return part 2 gman if u have msd when i get it ill take it k?

just let me know Tony.

yes sirrr! if u sell lmk 2

so far you're the only one interested... but i certinly will if that happenes.