Garrett T25 turbo
#1
Junior GTcars Poster
Thread Starter
iTrader: (3)
Join Date: Mar 2005
Location: oakville
Posts: 255
Rep Power: 705
Garrett T25 turbo
here are the specs.
Garret T25 .48trim, exhaust side is .49. This is a fast spooling turbo.. will spool around 3000rpm-3200rpm depending on set-up.
I've heard of the DSM t25's being pushed to 18psi.. so I awesome this turbo can exceed or match 18psi.. but it may be pushing it.
My t25 has a slight bit of shaft play (up and down, a mm or so) But it is perfectly safe because when the propeller is spinning it balances out the play and when oil is flowing through it, it also reduces the play by a tiny bit (even bran new turbos have a bit of shaft play). The seals are fine (so I've been told) it's water cooled also. I'm sure I am leaving so additional info. out, so any questions pm me or ask here.
Price- $300 obo
With Oil lines $360 obo
Thanks guys.
if interested I can also give my HF manifold with adapter plate for $95 and I can get a 2.5" stainless steel downpipe made for $295.. and I'll toss in some PVC piping for $20
Garret T25 .48trim, exhaust side is .49. This is a fast spooling turbo.. will spool around 3000rpm-3200rpm depending on set-up.
I've heard of the DSM t25's being pushed to 18psi.. so I awesome this turbo can exceed or match 18psi.. but it may be pushing it.
My t25 has a slight bit of shaft play (up and down, a mm or so) But it is perfectly safe because when the propeller is spinning it balances out the play and when oil is flowing through it, it also reduces the play by a tiny bit (even bran new turbos have a bit of shaft play). The seals are fine (so I've been told) it's water cooled also. I'm sure I am leaving so additional info. out, so any questions pm me or ask here.
Price- $300 obo
With Oil lines $360 obo
Thanks guys.
if interested I can also give my HF manifold with adapter plate for $95 and I can get a 2.5" stainless steel downpipe made for $295.. and I'll toss in some PVC piping for $20
Thread
Thread Starter
Forum
Replies
Last Post
Scracho
Car Parts For Sale
3
10-04-2005 08:35 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)