Part Out - EG and DC
#1
Part Out - EG and DC
Hey guys
I have the following items for sale. Prices are firm. I do not have pics of the items. First come first serve.
1. Eibach Sportline Springs with AGX shocks and struts and Energy suspension bushings for eg and dc
$500
2. Sir Brakes - entire spindles with Hawk pads and KVR rotors
$200
3. Si sway bar with poly bushings
$40
4. Type R throttle body bored out to 64mm
$200
5. Skunk 2 Intake Manifold
$250
6. New in the box 440cc RC Injectors
$350
7. P30 ecu with new un wired Hondata
$500
8. Wideband o2 with display (new in box + works with Hondata)
$350
9. Skunk 2 front strut bar and Spoon rear strut bar
$350
10. Momo Top Nascar (black with grey suede shoulders) Carbon Kevlar race bucket, aluminum rails and bracket for EG - most comfortable bucket I've sat in - no problem when I drove to Montreal and back in a 24 hour period.
$750
11. Apexi WS exhaust for eg hatch (6 months old)
$450
12. Mugen Jasma Header 4-2-1 c/w heat shield and 60mm collector - real thing!
$500
13. DC JDM 4-1 ceramic header 2 1/2" collector for b18
$250
14. MSD Ignition, Wires and Coil
$150
15. Field Vtec Controller
$150
16. Skunk 2 Spark Plug Cover, Skunk 2 Oil Cap and Skunk 2 Battery Tie Down
$200
17. Skunk2 Pro2 Cams, Pro series valve springs, ti retainers, and red cam gears - very little use with few vtec engagements (rebuilt head because motor was burning oil, after this head I was still burning oil, so I starting building a 2L type r block).
$1500
18. B18C5 head has not been disassembled yet with valvetrain from above - read to run. This P&P is the same as what guys are using to make 200+whp on 1.8L blocks with pump gas (one at 218 whp).
$600
19. Type R USDM Tranny (no grinds)
$1200
20. B18c5 block, new darton sleeves, 85 mm bore, new 85mm 12:1 weisco pistons, rings gapped, block machined - ready for assembly. The price is assembled. For $250 more it can be assembled for with Eagle rods. For $2600 for block and pistons unassembled. The block will not be sold without the pistons, but if a buyer wishes to sell the pistons on his/her own, this block is perfect for a 2L turbo setup.
$3000
FYI, the block and head with all the goodies above were being built for a 220-240 whp street car. Assembly and/or installation of all the items above can be arranged - pm for details.
21. EG Sunroof
$75
22. EG Si Seats (front and back0
$75
23. EG Rad and Fan
$50
Location: Located in Waterloo but can meet in the GTA Area
Contact: PM me. e-mail babyboisir@gmail.com or call 519-342-4595 and leave a message
Thanks Guys
I have the following items for sale. Prices are firm. I do not have pics of the items. First come first serve.
1. Eibach Sportline Springs with AGX shocks and struts and Energy suspension bushings for eg and dc
$500
2. Sir Brakes - entire spindles with Hawk pads and KVR rotors
$200
3. Si sway bar with poly bushings
$40
4. Type R throttle body bored out to 64mm
$200
5. Skunk 2 Intake Manifold
$250
6. New in the box 440cc RC Injectors
$350
7. P30 ecu with new un wired Hondata
$500
8. Wideband o2 with display (new in box + works with Hondata)
$350
9. Skunk 2 front strut bar and Spoon rear strut bar
$350
10. Momo Top Nascar (black with grey suede shoulders) Carbon Kevlar race bucket, aluminum rails and bracket for EG - most comfortable bucket I've sat in - no problem when I drove to Montreal and back in a 24 hour period.
$750
11. Apexi WS exhaust for eg hatch (6 months old)
$450
12. Mugen Jasma Header 4-2-1 c/w heat shield and 60mm collector - real thing!
$500
13. DC JDM 4-1 ceramic header 2 1/2" collector for b18
$250
14. MSD Ignition, Wires and Coil
$150
15. Field Vtec Controller
$150
16. Skunk 2 Spark Plug Cover, Skunk 2 Oil Cap and Skunk 2 Battery Tie Down
$200
17. Skunk2 Pro2 Cams, Pro series valve springs, ti retainers, and red cam gears - very little use with few vtec engagements (rebuilt head because motor was burning oil, after this head I was still burning oil, so I starting building a 2L type r block).
$1500
18. B18C5 head has not been disassembled yet with valvetrain from above - read to run. This P&P is the same as what guys are using to make 200+whp on 1.8L blocks with pump gas (one at 218 whp).
$600
19. Type R USDM Tranny (no grinds)
$1200
20. B18c5 block, new darton sleeves, 85 mm bore, new 85mm 12:1 weisco pistons, rings gapped, block machined - ready for assembly. The price is assembled. For $250 more it can be assembled for with Eagle rods. For $2600 for block and pistons unassembled. The block will not be sold without the pistons, but if a buyer wishes to sell the pistons on his/her own, this block is perfect for a 2L turbo setup.
$3000
FYI, the block and head with all the goodies above were being built for a 220-240 whp street car. Assembly and/or installation of all the items above can be arranged - pm for details.
21. EG Sunroof
$75
22. EG Si Seats (front and back0
$75
23. EG Rad and Fan
$50
Location: Located in Waterloo but can meet in the GTA Area
Contact: PM me. e-mail babyboisir@gmail.com or call 519-342-4595 and leave a message
Thanks Guys
Thread
Thread Starter
Forum
Replies
Last Post
JonnyL
honda / acura
0
06-02-2008 10:07 AM
jennyjenny
Honda Mailing List
0
10-29-2007 07:50 AM
jennyjenny
Honda Mailing List
0
10-29-2007 07:50 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)