Parts for Sale
07-20-2006, 08:57 PM
#1
~~ Hardcore Newb ~~
Thread Starter
Join Date: Apr 2006
Posts: 85
Rep Power: 660 
Parts for Sale
Just ripped out my 3.4L V6, Motor has 13,000 on it.
- Come's with everything to install it into your camaro. Including
PCM/ECU and Wire harness. (Will part if needed)
Jet Chip Stage II
Dynomax Super Turbo Muffler
Catco High flow cat
Pacesetter headers with Y pipe ( ON the Block)
much more I will post later....
- Come's with everything to install it into your camaro. Including
PCM/ECU and Wire harness. (Will part if needed)
Jet Chip Stage II
Dynomax Super Turbo Muffler
Catco High flow cat
Pacesetter headers with Y pipe ( ON the Block)
much more I will post later....
07-23-2006, 11:04 PM
#5
~~ Hardcore Newb ~~
Thread Starter
Join Date: Apr 2006
Posts: 85
Rep Power: 660
Honestly, I am considering putting the items on eBay to be sold to the hiest bidder. I put $700 into the block rebuild, the PCM, ECU, Wire harness. New Starter, Radiator, Plugs, MSD Wires, JET II Chip, ect... Make me an offer on the items, I won't refuse any good offers. They are basicly new parts.
07-24-2006, 04:36 AM
#7
~~ Hardcore Newb ~~
Thread Starter
Join Date: Apr 2006
Posts: 85
Rep Power: 660
I didn't know you had a degree in online sales. I'm very sorry. the reason I put a best offer, is becasue i don't want to highball anyone someone who is reasonable is someone who can take the motor. IF you want to know the value of the block it is no more then 700 in new items, and whatever street value is for the metal. I suppose somewhere in the area of 1400.00 total, you tell me. The PCM and harness I saw on eBay for as low as 150, and as high as 450. but these are all prices on eBay. this confusion is deleted when i state the parts can go to the best offer...get it?
07-24-2006, 11:13 PM
#9
Post Wench
Join Date: Jun 2003
Location: Nemacolin, PA
Posts: 10,392
Rep Power: 971
Originally Posted by JooneJune
I didn't know you had a degree in online sales. I'm very sorry. the reason I put a best offer, is becasue i don't want to highball anyone someone who is reasonable is someone who can take the motor. IF you want to know the value of the block it is no more then 700 in new items, and whatever street value is for the metal. I suppose somewhere in the area of 1400.00 total, you tell me. The PCM and harness I saw on eBay for as low as 150, and as high as 450. but these are all prices on eBay. this confusion is deleted when i state the parts can go to the best offer...get it?
2. You must post a price, no bidding. Putting up OBO is ok as long as there is a price before it.
07-25-2006, 03:39 AM
#10
~~~ SITE SPONSOR ~~~
Join Date: Oct 2005
Location: tucson, az
Posts: 2,083
Rep Power: 719
Originally Posted by JooneJune
I didn't know you had a degree in online sales. I'm very sorry. the reason I put a best offer, is becasue i don't want to highball anyone someone who is reasonable is someone who can take the motor. IF you want to know the value of the block it is no more then 700 in new items, and whatever street value is for the metal. I suppose somewhere in the area of 1400.00 total, you tell me. The PCM and harness I saw on eBay for as low as 150, and as high as 450. but these are all prices on eBay. this confusion is deleted when i state the parts can go to the best offer...get it?
07-26-2006, 01:45 AM
#12
~~ Hardcore Newb ~~
Thread Starter
Join Date: Apr 2006
Posts: 85
Rep Power: 660
Jet chip is new out of box, not even installed. Still has the warrentee in my name, cost 249.99 book value. I want to get 225 for it shipped, if i can't I'm going to try and send it back.
as for 2000V6cam, I'm not getting defenseful i didn't mean to come across any sort of way. For the record...
$ 750 takes the motor, PCM, ECU, Pacesetter headers AND Y pipe
$ 225 Takes the Fan, Radiator, and starter (new napa starter if it does fit my LT1... the Fan, and Radiator are 150)
$ 225 Takes the Jet Chip
$ 250 Takes the rear end w/ stabiliz bar (Drum Brake)
$ 75 Takes the Driveshaft
$ 50 Takes the MSD 8.5mm wires
$ 50 Takes the Dynomax supper turbo muffler
$ 65 Takes the Catco Cat
How ever you want to ship these items is up to you at your cost. I can even load them up in my truck on my off days for a $. Exhaust has no more miles then the motor does (13k) same with the majority of the engine compartment equiptment (Jet chip was never installed) OEM radiator, driveshaft, rear end, and fan.
Motor was rebuilt... heads were sent to a machine shop, new gaskets ect...
There is more then likely more parts to list, I'de rather not part the groups and their pricing, but I will if necessary. If anyone needs stuff let me know, thanks!
as for 2000V6cam, I'm not getting defenseful i didn't mean to come across any sort of way. For the record...
$ 750 takes the motor, PCM, ECU, Pacesetter headers AND Y pipe
$ 225 Takes the Fan, Radiator, and starter (new napa starter if it does fit my LT1... the Fan, and Radiator are 150)
$ 225 Takes the Jet Chip
$ 250 Takes the rear end w/ stabiliz bar (Drum Brake)
$ 75 Takes the Driveshaft
$ 50 Takes the MSD 8.5mm wires
$ 50 Takes the Dynomax supper turbo muffler
$ 65 Takes the Catco Cat
How ever you want to ship these items is up to you at your cost. I can even load them up in my truck on my off days for a $. Exhaust has no more miles then the motor does (13k) same with the majority of the engine compartment equiptment (Jet chip was never installed) OEM radiator, driveshaft, rear end, and fan.
Motor was rebuilt... heads were sent to a machine shop, new gaskets ect...
There is more then likely more parts to list, I'de rather not part the groups and their pricing, but I will if necessary. If anyone needs stuff let me know, thanks!
Thread
Thread Starter
Forum
Replies
Last Post
93-hatch-back
Car Parts For Sale
8
04-26-2005 07:19 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)