Super Moving SALE! Tools, parts, rims etc.
07-06-2007, 05:51 PM
#1
Super Moving SALE! Tools, parts, rims etc.
Im moving to beautiful Victoria B.C. in early september. Im hoping too start a career there. I also checked into the "casc" type sanctioning body there and guess what... they have badass Hill Climbs up mountains that have rules similar to solo1 but are tarmac rally esque. So Im knida excited about racing through the mountains. I'm gonna do the 5000+km drive down there in my ITR. Im selling all my shop related goodies. Please feel free to reply with you opinions of livng out west etc.
ALL PARTS ARE LOCATED IN BRANTFORD, I CAN BE REACHED @ 705 252 1991 or email (freeltec@hotmail.com) dont pm me or reply in thread unless to bump!
Here goes:
cherry picker $350
mint Omni Coilovers 10k/12k $750
Mint JDM ITR Cams $300
CRV Rims with great winter tires Michlin X-Ice Buy Early and save. There is no winter in Victoria so I wont be needing these
$350
225/50/15 Toyo RA-1 Great shape, Lots of life left $250 if you take them off my rims. I paid a LOT for these brand new and they still have way more then half the meat on em.
Prelude "blade" wheels with Hankook k104 tires. Tires have about 50percent tread left. The rims have been painted bronze. These wheels are perfect and have ZERO curbing. $250 with tires!
Sparco Red Harnesses (pair), Brand Spanking new, never used.
Greddy ProfecB (orignial version) with Remote switching button (a $100 option). This boost controller is highly sought after because of its ease of use and reliability. Its much better then the specII and many others, Realiable, tune on the fly boost. $300
1990 Integra LS tranny. Was gonna use the tranny for the fifth gear on my ITR. The tranny works fine, but i have never ran it in a car myself. $250
New ITR (obd1) oilpump $130 I bought this when i was rebuilding my ITR engine then last minute realised that i needed a crank censor for obd2, so i had to buy the obd2 one.
Obd-0 B16a Dizzy $120 Mint shape ( i went obd1 on my EF)
Mint Set of Tokikio Blues. They have less then 10k on them. $280
For 88-91 Ef civic CRX and DA INtegras
3" intake piping. One is custom and the other was bought. $10 & $20 each
DA LS integra Starter $50, EF civic Si Cam $20, EF headlight $30
B16a1 Intake manifold $20, EG hatch spoiler $20
ARC welder with all the extra accessories, goggles and sticks. Perfect beginner weleder. I used it to baffle oil pans, make brackets, mounts and even weld on quarter panels. $150
Large Chop Saw, Like new. I only used it a few times to make charge piping on my turbo car. Works mint and I'll even Include a Extra Blade. $150
B16a oilpan, perfect to use stock or baffle. $40
Bench Grinder, works great. $20
Real Autometer Monster 5" Tach with Shift Light, Black and clean looking
$150
Vortech FMU 12:1 $60. Works great for homemade turbo fuel management.
B&M FPR, $ 35
OBD 1 H22a ecu: $150
OBD 1 P06 ecu : $60 ( can be chipped to be p28 dohc vtec)
OBD 0 PR3 b16a1 ecu: $100
2x10" Sub Box $50 takes it. Great shape and sound.
1990 CRX hatch, Mint shape, no rust. $80
ITR stock Intake box $50 (flows better then other stock intakes)
1990 CRX DX seats $30 for the pair.
ALL PARTS ARE LOCATED IN BRANTFORD, I CAN BE REACHED @ 705 252 1991 or email (freeltec@hotmail.com) dont pm me or reply in thread unless to bump!
Here goes:
cherry picker $350
mint Omni Coilovers 10k/12k $750
Mint JDM ITR Cams $300
CRV Rims with great winter tires Michlin X-Ice Buy Early and save. There is no winter in Victoria so I wont be needing these
$350
225/50/15 Toyo RA-1 Great shape, Lots of life left $250 if you take them off my rims. I paid a LOT for these brand new and they still have way more then half the meat on em.
Prelude "blade" wheels with Hankook k104 tires. Tires have about 50percent tread left. The rims have been painted bronze. These wheels are perfect and have ZERO curbing. $250 with tires!
Sparco Red Harnesses (pair), Brand Spanking new, never used.
Greddy ProfecB (orignial version) with Remote switching button (a $100 option). This boost controller is highly sought after because of its ease of use and reliability. Its much better then the specII and many others, Realiable, tune on the fly boost. $300
1990 Integra LS tranny. Was gonna use the tranny for the fifth gear on my ITR. The tranny works fine, but i have never ran it in a car myself. $250
New ITR (obd1) oilpump $130 I bought this when i was rebuilding my ITR engine then last minute realised that i needed a crank censor for obd2, so i had to buy the obd2 one.
Obd-0 B16a Dizzy $120 Mint shape ( i went obd1 on my EF)
Mint Set of Tokikio Blues. They have less then 10k on them. $280
For 88-91 Ef civic CRX and DA INtegras
3" intake piping. One is custom and the other was bought. $10 & $20 each
DA LS integra Starter $50, EF civic Si Cam $20, EF headlight $30
B16a1 Intake manifold $20, EG hatch spoiler $20
ARC welder with all the extra accessories, goggles and sticks. Perfect beginner weleder. I used it to baffle oil pans, make brackets, mounts and even weld on quarter panels. $150
Large Chop Saw, Like new. I only used it a few times to make charge piping on my turbo car. Works mint and I'll even Include a Extra Blade. $150
B16a oilpan, perfect to use stock or baffle. $40
Bench Grinder, works great. $20
Real Autometer Monster 5" Tach with Shift Light, Black and clean looking
$150
Vortech FMU 12:1 $60. Works great for homemade turbo fuel management.
B&M FPR, $ 35
OBD 1 H22a ecu: $150
OBD 1 P06 ecu : $60 ( can be chipped to be p28 dohc vtec)
OBD 0 PR3 b16a1 ecu: $100
2x10" Sub Box $50 takes it. Great shape and sound.
1990 CRX hatch, Mint shape, no rust. $80
ITR stock Intake box $50 (flows better then other stock intakes)
1990 CRX DX seats $30 for the pair.
Thread
Thread Starter
Forum
Replies
Last Post
Hatch2k
Car Parts For Sale
5
03-20-2006 02:31 AM
hondacuraddict
Car Parts For Sale
0
07-15-2005 05:46 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)