FS: '92 Civic LX 5spd, B18B chipped, bolt-on's, full suspension, clean, etc. *cheap*
03-12-2007, 05:33 PM
#1
~~ Hardcore Newb ~~
Thread Starter
Join Date: Oct 2005
Posts: 114
Rep Power: 680 
FS: '92 Civic LX 5spd, B18B chipped, bolt-on's, full suspension, clean, etc. *cheap*
Details:
1992 B18B Red Civic Sedan - (Past Honda technician owned, now Honda employee owned)
5 spd (LS)
360 000km on body (clean underbody and frame, usual Honda surface/fender rust, some minor dents and paint fade in some areas - expected)
Clean interior, full EX-V
AC - disconnected/needs to be recharged
Engine:
1999 B18B swap - July 05
80-90K on motor & tranny
Chipped ECU
DC Sport 4 into 1 header (ceramic)
Akimoto??? intake with ITG filter
2.5" Cat Back piping - installed July 05
Magnaflow 'stock looking' performance muffler - installed July 05
??? Short shifter
OEM Cap, rotor, wires, plugs (full tune up) - July 06
New Radiator - installed July 05
Suspension:
New Tockico Illuminas 5 way adjustable - installed July 05
Ground Control Coilovers - installed July 05
Cusco??? under-engine X-Brace - July 05
Generic F&R Strut Tower Bars - July 06
Do-Luck (Japan) mid-Floor bar - July 06
Civic Si F&R sway Bars w/ new bushings and hardware - July 06
New OEM suspension bushings F&R - installed Feb 07
14" steelie wheels (black) with lock nut, Si hubcaps and winter tires
Brakes:
SiR 4 wheel disk brake conversion - installed July 06
New OEM rotors F&R - installed July 06
New OEM Pads F&R - installed July 06
Earl's Stainless Steel Brake Lines - installed July 06
Motul RBF600 brake fluid
Maintenance:
New outer tie rods done @ Honda - Aug 05
Alignment done @ Honda - Aug 05
Oil changed @ Honda - 4000-5000KM intervals since July 05 (motor install)
New Windshield - Installed Sept 05
New Radiator - installed July 05
OEM Cap, rotor, wires, plugs - July 06
New free flow resonator - December 06
New lower ball joints, inner tie rods, front lower control arm bushings, driveshafts - Feb 07
Alignment done - Feb 07
Extras:
New Blaupunkt "Bermuda" MP3 CD player - Dec 06
Sparco Sprint racing seat mounted on Sparco Hardware
5 pt racing seat belt harness
MUGEN steering wheel + BOSS hub - Dec 06
Si Gauge Cluster (w/ tach) - Aug 06
ProForm Adjustable shift light
Autometer A/F gauge
Autometer Pillar Pod
*Car runs flawless, perfect daily driver sleeper and is track ready, handles great with summer performance tires/rims
*Also includes all stock pieces (intake box, steering wheel, drivers seat, etc.)
*LS/VTEC ready!
*Family owned almost its whole life, clean title
Priced for quick sale: $5500 OBO - cert/emissions can be done by me if buyer so desires, or DIY
(Honestly, just the motor/tranny/new maintenance parts and mods are already over the asking price........)
Located in north Toronto
email me to see the car weeknights or weekends: eurasian1@rogers.com
^Last pic is with SPARCO seat installed, before the install of the MUGEN steering wheel and new deck
Price is negotiable within reasonable offers, need it off my driveway, you could probably even make money parting this car out, located near Markham in Scarborough, come for a test drive.
1992 B18B Red Civic Sedan - (Past Honda technician owned, now Honda employee owned)
5 spd (LS)
360 000km on body (clean underbody and frame, usual Honda surface/fender rust, some minor dents and paint fade in some areas - expected)
Clean interior, full EX-V
AC - disconnected/needs to be recharged
Engine:
1999 B18B swap - July 05
80-90K on motor & tranny
Chipped ECU
DC Sport 4 into 1 header (ceramic)
Akimoto??? intake with ITG filter
2.5" Cat Back piping - installed July 05
Magnaflow 'stock looking' performance muffler - installed July 05
??? Short shifter
OEM Cap, rotor, wires, plugs (full tune up) - July 06
New Radiator - installed July 05
Suspension:
New Tockico Illuminas 5 way adjustable - installed July 05
Ground Control Coilovers - installed July 05
Cusco??? under-engine X-Brace - July 05
Generic F&R Strut Tower Bars - July 06
Do-Luck (Japan) mid-Floor bar - July 06
Civic Si F&R sway Bars w/ new bushings and hardware - July 06
New OEM suspension bushings F&R - installed Feb 07
14" steelie wheels (black) with lock nut, Si hubcaps and winter tires
Brakes:
SiR 4 wheel disk brake conversion - installed July 06
New OEM rotors F&R - installed July 06
New OEM Pads F&R - installed July 06
Earl's Stainless Steel Brake Lines - installed July 06
Motul RBF600 brake fluid
Maintenance:
New outer tie rods done @ Honda - Aug 05
Alignment done @ Honda - Aug 05
Oil changed @ Honda - 4000-5000KM intervals since July 05 (motor install)
New Windshield - Installed Sept 05
New Radiator - installed July 05
OEM Cap, rotor, wires, plugs - July 06
New free flow resonator - December 06
New lower ball joints, inner tie rods, front lower control arm bushings, driveshafts - Feb 07
Alignment done - Feb 07
Extras:
New Blaupunkt "Bermuda" MP3 CD player - Dec 06
Sparco Sprint racing seat mounted on Sparco Hardware
5 pt racing seat belt harness
MUGEN steering wheel + BOSS hub - Dec 06
Si Gauge Cluster (w/ tach) - Aug 06
ProForm Adjustable shift light
Autometer A/F gauge
Autometer Pillar Pod
*Car runs flawless, perfect daily driver sleeper and is track ready, handles great with summer performance tires/rims
*Also includes all stock pieces (intake box, steering wheel, drivers seat, etc.)
*LS/VTEC ready!
*Family owned almost its whole life, clean title
Priced for quick sale: $5500 OBO - cert/emissions can be done by me if buyer so desires, or DIY
(Honestly, just the motor/tranny/new maintenance parts and mods are already over the asking price........)
Located in north Toronto
email me to see the car weeknights or weekends: eurasian1@rogers.com
^Last pic is with SPARCO seat installed, before the install of the MUGEN steering wheel and new deck
Price is negotiable within reasonable offers, need it off my driveway, you could probably even make money parting this car out, located near Markham in Scarborough, come for a test drive.
03-28-2007, 10:25 AM
#2
~~ Hardcore Newb ~~
Thread Starter
Join Date: Oct 2005
Posts: 114
Rep Power: 680
*BUMP*
NEW PRICE $5000 OBO!
Need off driveway...shoot, you could part the car out and make money, or drive it and enjoy it as is....for the price, getting more than enough.
-New orange clear corners added (not pictured)
-I will cover emission+certify (which it just passed 8 months ago, so won't need emissions done again even)
NEW PRICE $5000 OBO!
Need off driveway...shoot, you could part the car out and make money, or drive it and enjoy it as is....for the price, getting more than enough.
-New orange clear corners added (not pictured)
-I will cover emission+certify (which it just passed 8 months ago, so won't need emissions done again even)
05-01-2007, 05:02 PM
#9
~~ Hardcore Newb ~~
Thread Starter
Join Date: Oct 2005
Posts: 114
Rep Power: 680
?
you mean as in lowered price? or as in the car's actual stance with the ground control coilovers springs?
i can still negotiate somewhat on price yes, but let me know soon else the car may be parted out....PM me.
as for stance, in the pics it is on its lowest setting i believe, or close to it, so it can be raised yes, (tho remember the pics u see it has on the higher profile winters), tho i had 40 profile tires on 16x7's for summer and it was nicely lowered, about 1inch gap.
you mean as in lowered price? or as in the car's actual stance with the ground control coilovers springs?
i can still negotiate somewhat on price yes, but let me know soon else the car may be parted out....PM me.
as for stance, in the pics it is on its lowest setting i believe, or close to it, so it can be raised yes, (tho remember the pics u see it has on the higher profile winters), tho i had 40 profile tires on 16x7's for summer and it was nicely lowered, about 1inch gap.
05-10-2007, 05:24 PM
#10
~~ Hardcore Newb ~~
Thread Starter
Join Date: Oct 2005
Posts: 114
Rep Power: 680
FINAL LISTING PRICE BEFORE PART OUT!!!!
$4000 takes everything!
(racing seat pretty much sold though, will still include the Sparco rails though, and race-belt harness with car)
$4000 takes everything!
(racing seat pretty much sold though, will still include the Sparco rails though, and race-belt harness with car)
Last edited by 3.8T; 05-15-2007 at 09:45 AM.
