FS: JDM 96 Spec ITR ----->
07-30-2006, 11:38 PM
#1
FS: JDM 96 Spec ITR ----->
Putting up my baby for sale, i know it sucks, but i have to do it at this point in life.
Some of you know or seen this car in person, so i wont bore you with too much details.
Specs:
-1996 integra Type R (right hand drive, NOT converted, but Imported)
-64,xxx kms as of right now
-originally C-W, repainted P-Y, amazing work from the body shop, everything was taken out separtely and painted.
-still original motor/tranny (S80 LSD)
-head has been redone, port + polish, skunk2 stage 2 cams, springs, retainers, skunk2 68mm throttle body, factory IM, etc, etc.
-block is still stock, hasnt been touched
-megan 4-1 2.5" race header, test pipe, greddy midpipe, spoon axle back
-ecu has been converted to chipped p28 thanks to ******** (tuned)
-brand new exedy clutch/fidanza flywheel installed last week with a spoon flywheel on the side
-jdm factory 4 bolt has been swapped for 5 bolt, bigger brakes all around, kvr front slotted rotors, spoon 4 pot calipers, kvr pads and oem pads included, sfida s.s brake lines all around, etc, etc.
-suspension consists of tein HA's, 16 way adjustable, 4 point roll bars, c-pillar bar, spoon rear upper strut bar, along with all factory bars, T1R front upper camber adj. etc, etc.
-outside consists of spoon cf hood + lip, oem HID, etc.
-rollin on 15"by7 ATS Comp Lite rims, with 205/50ZR15 hankook RS2 rubber
-interior consists of factory c/f pieces in various places, HKS Oil temp and pressure gauges, GReddy pod, Apexi rev/speed meter, Bride door inserts, factory recaro red seats, Compustar pager alarm (remote start avail. but not hooked up), etc, etc ( i have all the interior peices, all im missin are the rear seats)
Since winter is getting close again, and this car was never winter driven and only seen rain if i had to take it out, i will also include my 1987 honda accord as a winter beater, so for now, im offering a complete package deal.
Price for Everything: $27,500 Cdn OBO. Will NOT PART out anything off the car, so dont ask for just parts!
Well, im sure ive missed a couple things here and there.. any further questions contact me at:
Email: tvtec@hotmail.com
Cell: 519.496.2002 (alex)
Some of you know or seen this car in person, so i wont bore you with too much details.
Specs:
-1996 integra Type R (right hand drive, NOT converted, but Imported)
-64,xxx kms as of right now
-originally C-W, repainted P-Y, amazing work from the body shop, everything was taken out separtely and painted.
-still original motor/tranny (S80 LSD)
-head has been redone, port + polish, skunk2 stage 2 cams, springs, retainers, skunk2 68mm throttle body, factory IM, etc, etc.
-block is still stock, hasnt been touched
-megan 4-1 2.5" race header, test pipe, greddy midpipe, spoon axle back
-ecu has been converted to chipped p28 thanks to ******** (tuned)
-brand new exedy clutch/fidanza flywheel installed last week with a spoon flywheel on the side
-jdm factory 4 bolt has been swapped for 5 bolt, bigger brakes all around, kvr front slotted rotors, spoon 4 pot calipers, kvr pads and oem pads included, sfida s.s brake lines all around, etc, etc.
-suspension consists of tein HA's, 16 way adjustable, 4 point roll bars, c-pillar bar, spoon rear upper strut bar, along with all factory bars, T1R front upper camber adj. etc, etc.
-outside consists of spoon cf hood + lip, oem HID, etc.
-rollin on 15"by7 ATS Comp Lite rims, with 205/50ZR15 hankook RS2 rubber
-interior consists of factory c/f pieces in various places, HKS Oil temp and pressure gauges, GReddy pod, Apexi rev/speed meter, Bride door inserts, factory recaro red seats, Compustar pager alarm (remote start avail. but not hooked up), etc, etc ( i have all the interior peices, all im missin are the rear seats)
Since winter is getting close again, and this car was never winter driven and only seen rain if i had to take it out, i will also include my 1987 honda accord as a winter beater, so for now, im offering a complete package deal.
Price for Everything: $27,500 Cdn OBO. Will NOT PART out anything off the car, so dont ask for just parts!
Well, im sure ive missed a couple things here and there.. any further questions contact me at:
Email: tvtec@hotmail.com
Cell: 519.496.2002 (alex)
08-07-2006, 07:59 PM
#10
here are some pics:
i have alot more...i can email the rest.
alright guys, this car must go now ASAP,
Price drop to $25,500 OBO!!!
i have alot more...i can email the rest.
alright guys, this car must go now ASAP,
Price drop to $25,500 OBO!!!
Last edited by JDMDC2R; 08-08-2006 at 05:27 PM. Reason: Automerged Doublepost
09-18-2006, 09:40 PM
#12
UPDATE:
Alright guys, about a month ago, something bad happened, one of my valve springs let loose, which in the end caused enough damage to the motor meaning it needs a new head. One piston is no good, the rest are fine and the entire block is still perfect. Only thing needed now to make it drive again is a new head, either b16 or itr head.
I am obviously lowering the price by a couple grand for sure now, since the motor is pouched, so for someone looking for a great winter project, THIS IS IT! Otherwise if i dont sell it now, ill rebuild it slowly over winter with all new parts and sell it for more money (my original price of 25g's) next spring.
So like i said, if anyone is interested in taking over this "project" and bringing this car back to life , shoot me any reasonable offer.
The car has been sitting inside my garage ever since, and if i see no interest, ill start buying parts and putting it together slowly. Regardless i need the car gone, whether is now for a couple grand cheaper , or in the spring for the original price as mentioned above.
Any other questions, comments, PM me or hit me via email: tvtec@hotmail.com
Thanks!
Alright guys, about a month ago, something bad happened, one of my valve springs let loose, which in the end caused enough damage to the motor meaning it needs a new head. One piston is no good, the rest are fine and the entire block is still perfect. Only thing needed now to make it drive again is a new head, either b16 or itr head.
I am obviously lowering the price by a couple grand for sure now, since the motor is pouched, so for someone looking for a great winter project, THIS IS IT! Otherwise if i dont sell it now, ill rebuild it slowly over winter with all new parts and sell it for more money (my original price of 25g's) next spring.
So like i said, if anyone is interested in taking over this "project" and bringing this car back to life , shoot me any reasonable offer.
The car has been sitting inside my garage ever since, and if i see no interest, ill start buying parts and putting it together slowly. Regardless i need the car gone, whether is now for a couple grand cheaper , or in the spring for the original price as mentioned above.
Any other questions, comments, PM me or hit me via email: tvtec@hotmail.com
Thanks!