jamilz28

i have a lt1 rebuilt bored .03 and i replaced the heads .

Edelbrock Performer Heads 54cc

SpeedPro 10.5:1 Skirt Coated Hypereutectic Pistons

and stock crankshaft

69z-28

350 maybe. idk are you beefing up your injection and fuel system and crap like that?

jamilz28

not yet it broke and needed to be rebuilt so i put good parts on it
this summer i will put bigger injecters and other stuff

archemedes

not going to get a whole lot you need to change teh cam to match the heads too

97z2801ss

yep for max power a good set of heads with a matched cam is always good

69z-28

do the cam before anythign else. and get some machine work done on the heads.

FORCE_FED_Z

You will gain a little bit but not much being mainly all stock still...

Put in a healthy cam and a decent set of heads and 425 HP wouldn't be hard at all to achieve...

fbird42

you want to do everything at once .. otherwise those mods wont do much for u rite of way

97z2801ss

technaically you can do it as u get money but U wont see a huge gain..

fbird42

save up ur money and do everything at once that way you will get a lot of horsepower all at once.. one thing you never wanna do is just put in a cam a lone .. fyi

jamilz28

i did replace the cam shaft ( i dont know which one because the guy who rebuild my motor picked it i will ask him when i get my car back friday.)

i thought that you guys ment crank shaft all they did was
clean it because it is like new

97z2801ss

My buddie Put a cam in his 97 Z didnt touch the heads or Intake manifold...so you can put a cam in alone...Id do it all together so its matched but Theres so many ways u can do it just make sure you have the money.

archemedes

cam can always be done alone (may want to change lifters but not always) very few mods require other supporting mods to actually work, to get the most from them of course you'll need more

fbird42

i dk how many times i said this b4 but theres no point in just putting in a cam.. if u want to learn from an expert ask HeatSeekerWS6 hes the most knowledgable and can really help you out if you're looking to build a fast car .. i dk if u are or not i was jus saying hes ur go to guy

97z2801ss

Yea we'll from knowing people who just put cams in there car you can do it!!!! Other mods will just make it faster. Its all in your budget like i said. The most knowledgeable guy ill ever meet? i dont know about that. N im not doubtin his knowledge. I even asked my engine teacher and hes been building high perf. motors for 20+ years.