1BAD86Z

I want to know who is the fastest 3rd gen here. I've got a stock suspension, no wheelie bars, stock bodied, true 10" tire car. I have gone 9.33 @ 148 to date and just want some more ideas to go faster without having to backhalf it. Current race weight is 3320 with me in it and I am trying to cut some more out of it and get it into the 8's.

Mike Jones

iTrader: (1)

You're the fastest 3rd gen, the second fastest last run was a 11.12 with a 400 block.

1BAD86Z

You gotta be kiding me! What happened my fellow 3rd gener's? We need to keep our cars competitive with these LT1 and LS1 guys. LOL, I hope I didn't upset anyone.

imported_blade

maaan.
i've just got a near bone stock 350 in mine...
but eh.
what's in yers?

ryann

yeah.. we had tons of plans for mine.. but we're selling it due to moving.(dont kno when yet) but i'll get another camaro by this summer.

niceroc

yeah not many thirdgen's here, let alone fast ones, i just dont have the money to paint, or make my car fast so now i have to stick with a 15 sec(14 sec if im lucky) 305 5 speed in mine

1BAD86Z

Motor is a 421ci with 14.5 to 1 comp., 1050 Dominator with NOS X 2 stage plate, Dart Pro one heads fully CNC'ed and a Edelbrok super victor semi ported, T350 with 4100 stall and trans brake, Ford 9" with 4.11 and 35 spline axles with a spool, stock suspension with aftermarket BMR solid arms, Competition Eng. torque arm, Hal 12 ways, front end has a PA X member with their A arms and coil overs and I run a Tokico 5 way strut, just until Hal makes something better, and a manual rack. 10 point cage but that will be upgraded to a 12 point and I also have to add a parachute mount cause I plan on opening up the second stage and go 8's this season.

Oh, heads are still a 23 degree head, no angle milling or raised runner design.

Here is an old pic of the current 421 without the NOS kit and manual brake master cyclinder and headers.

1BAD86Z

LOL, I based my build from a friend of a friend that built a RS with a 406. I have had mine for over 11 years and I'll probably be buried in it. Mine was a 305 TPI, 700R4, 2.73 one legger, and I bought this one cause I could eat off the bottom of it.

1BAD86Z

Thats ok, you don't have to look while going going fast! I build mine before I had paint so don't feel bad just stick with it. I never thought I would ever break into the 10's let alone low 9's.

ryann

just outta curiousty. how much did ya have to dump into that to get in the 9's?

1BAD86Z

Well the first motor that got me into the 9's was a 406, I had a $1100 rotating assembly, and some Dart iron eagles that were just touched by hand with a big shot set to 200 and it went 9.90's a few times that on a cold day she let a rod go at the stripe at 138 mph. I had about $4500.00 in that whole motor and I had the lower end put together by a shop. Before

After the BOOM



The new combo is a whole new mill, I have about $8500.00 in the whole motor carb to pan. I put some really god parts in this one, I have Oliver billet rods with ARP 3.5 bolts, Howards extreme crank, Ross custom NOS pistons, stock block with billet caps in all 5 positions and the block is filled to the water pump with concrete. Basicly the motor is good for about 1200hp on NOS, the pistons are the week link and thats fine with me.

imported_Kyle

Sorry about the late reply but i have nothing on 1BAD86Z 3rd gen. Right now you can see all the mods i have below. I am having the rear end checked out next sunday to see what i can do with it. If anyone has any ideas on a new rear end, please let me know. Thanks.

MetalliCamaro

i am taking mine to the track in the summer of 2006 but as of right now Highest speed ive been at, The speedo reads up to 140mph i was at 145mph and wouldnt go passed it but it took longer than 20 seconds to get there for sure, but I will post up some time slips this summer, june i hope.

1BAD86Z

I'm putting a parachute on it cause I plan on going over 150 in the 1/4 this season.

Camarocam

Damn I feel like I have a honda compared to you guys