Rep Power: 730

Anyone have some sort of guide on how to install halo headlights on a 98 camaro if so thankyou

 
Rep Power: 785

havent hooked up the wiring for the halo's, but u need to hook it up to the wiring harness, either to the fog lights or the daytime running lights, im doing mine to the day time running lights.

 
Rep Power: 724

i installed my halo to my DRL...halo got red for positive and black for ground..connect red with DRL blue wire and black to DRL black...ur halo will light up at daytime and act as a signal lights too....thats how i connect with my 98 camaro...Note ...goodluck its a bit tight space out there i suggest u access the DRL thru the bottom part just remove the plastic piece....

 
Rep Power: 737

search camarov6.. or ask my friend Mark. aim sn threadoflength. i cant wait to see these on Daniel@!

 
Rep Power: 730

ok so i put them on but the fit isnt as good as i hoped...theres a gap between fascia and light...and i got to ajust them there facing at the ground...but when i do it it make the gap even bigger GRR! took me 5 hours for headlights and side lights...looong story

 
Rep Power: 794

wow 5 hours thats a while, not sure whats going wrong if their not lining up all i can suggest is just adjust those screws till they line up right other than that good luck

 
Rep Power: 730

ya...well got it all in and blinkers didnt work...so had to take it all out. but should the lights be flush at the bottom against the fender?

 
Rep Power: 794

mine are pretty much flush at the bottom but mine are the stock lights so im not sure if aftermarket halos will fit the same ( aftermarket stuff usually doesnt)

 
Rep Power: 730

anyone that has halos please help????

 
Rep Power: 785

i have them, they are a ***** to install and remeber aftermarket wont fit flush...these lights need night tuning, dont worry about minor gaps, no lights will fit 100% flush.

 
Rep Power: 730

alright ill try to get picks....and see if the gap is "minor"

 
Rep Power: 724

i got a little gap with my halo....i fill that gap with more rubber (autozone 10 bucks)...if u connect it the halo red wire to DRL blue wire and halo black wire to DRL drl black wire it shld work....yes its time consuming but its gonna look awesome..

 
Rep Power: 730

ya i did that and it works i got pics ill upload them tonight or tomorrow...merry christmas all

 
Rep Power: 737

merry christmas.. cant wait for the pics!!1