HELLPPPPPPP!!!!!!!!!!!!!
Thread Starter
~~ Hardcore Newb ~~
Joined: Mar 2008
Posts: 5
From: oklahoma
Rep Power: 0 
HELLPPPPPPP!!!!!!!!!!!!!
i really need some one to take a picture of witch wire to cut when converting the tail lights on a 93 camaro to 97 and up tail lights. everyone says the light blue one i did that and the amber lights still come on when i hit the break im stumped?
~~ Hardcore Newb ~~
Joined: Mar 2008
Posts: 33
From: Langley, BC, Canada
Rep Power: 659
Do you have any schematics? shbox.com I believe has them. Also my haynes manual does too. I would use a multimeter and see what you are getting for power across the wires. Will look into it.
~~ Hardcore Newb ~~
Joined: Mar 2008
Posts: 33
From: Langley, BC, Canada
Rep Power: 659
1995 and older...
Left Tail light = brown / black
Left rear tail/stop/turnlights Yellow/brown
Right rear tail /stop/turn lights Brown / dark green
Basically all power constantly on is brown, all black is ground
As for the 97 I have to do some research.
Left Tail light = brown / black
Left rear tail/stop/turnlights Yellow/brown
Right rear tail /stop/turn lights Brown / dark green
Basically all power constantly on is brown, all black is ground
As for the 97 I have to do some research.
~~ Hardcore Newb ~~
Joined: Mar 2008
Posts: 33
From: Langley, BC, Canada
Rep Power: 659
Apparently this schematic is different for the 95 than my Haynes http://shbox.com/1/exterior_lights.htm
This one tell you about the light blue (1995)
Also lots of info here... More info
This one tell you about the light blue (1995)
Also lots of info here... More info