WarHawK R

HEY fellas , anyone else building a ls1 3rd gen?i am in the process of building my twin turbo 365 ci ls1 t56 project. i have aquired almost 90% of the stuff i am going to need to complete my project. the turbos i will be using will support up to 1100 hp, my motor was built by me with mahle pistons and eagle h-beams,eagle crank. i am gonna paint the car viper steel gray,it is a hardtop car i am using a stock ws6 rear for now and ls1 front disk conversion.

paarman97maro

I know a guy with an 88 that is puttin a twin turbo system in his car... Im not positive which engine he is putting in though

Edit: actually just found a PM he sent me a while back..

a 350ci motor with 8.0-1 arais pistons,5.7 carrillo h-beam rods with sps bolts, scat 4340 crank, custom cam still have to order it, gm fastburn heads same as last year bit im porting them,studscustom stainless header by me, 2 master power t70 turbos,2 turbonetics waste gates and 1 blow off valve, and a AEM EMS computer.

let me put it this way 1000whp

i could put more boost it it for more power but the crank is only rated at 1000 hp and i dont have a dart or world block

Mike Jones

iTrader: (1)

There's a member here with an LS1/T56 in his late third gen Camaro but I can't think of his screen name.

imported_blade

it's not blade
someday, i may do this.

archemedes

I plan on an ls7 in a bravada eventually gotta fab an oil pan though

Camarocam

Wow That sounds awesome!!!! keep us posted!!!