my car is messed up
#19
Average GTcars Poster
Thread Starter
Join Date: Jan 2005
Location: oklahoma city
Posts: 558
Rep Power: 0
is this a good kit and do you think i will get good power out of it ?
Engine Rebuild, 4.060 in. Bore, Chevy, Small Block LT1, Kit
http://store.summitracing.com/defaul...ch&Ntt=rebuild
?
Engine Rebuild, 4.060 in. Bore, Chevy, Small Block LT1, Kit
http://store.summitracing.com/defaul...ch&Ntt=rebuild
?
#20
you may not need to go .060 over I would start with .030 from a relability standpoint, not that the bigger bore isn't reliable it's just the most you want to take a sbc engine without filling the block so anything happens (bad ring or something) it's junk
#23
no specific kit will give you any power, it's all in combinations, and alot has to do with machine work, a basic kit may get you there if you do head work and upgrade the cam (few kits have the performance cam) 396 is a big block would be more work to install, 383 is a stroked 350 so it's the same engine
#24
no specific kit will give you any power, it's all in combinations, and alot has to do with machine work, a basic kit may get you there if you do head work and upgrade the cam (few kits have the performance cam) 396 is a big block would be more work to install, 383 is a stroked 350 so it's the same engine
#25
Average GTcars Poster
Thread Starter
Join Date: Jan 2005
Location: oklahoma city
Posts: 558
Rep Power: 0
#26
Average GTcars Poster
Thread Starter
Join Date: Jan 2005
Location: oklahoma city
Posts: 558
Rep Power: 0