please help
Thread Starter
Skilled GTcars Poster
Joined: Nov 2006
Posts: 844
From: Sac, California
Rep Power: 725 
please help
I pulled out my left middle speaker in my car and the wires are soldered to the stock speaker and my new infinity speakers dont come with cables wat am i supposed to do
~~~ SITE SPONSOR ~~~
Joined: Oct 2005
Posts: 2,083
From: tucson, az
Rep Power: 789
Originally Posted by ITSA6
cut the wires right behind the soldering then restrip the wires put them with new connections and put it on your new speaker
GTcars - Post God !
Joined: Dec 2004
Posts: 7,679
From: Everywhere
Rep Power: 930
The wires that came with the speakers you bought should have the female disconect ends on it to plug into there just cut the wires off your stock speakers and use butt conectors on the stock to the new wires or buy the female discont ends they should look like the picture below well atleast that what most of them are like. 
Thread Starter
Skilled GTcars Poster
Joined: Nov 2006
Posts: 844
From: Sac, California
Rep Power: 725
alright i cut off the stock speakers than stripped them and than wrapped the wire through the little holes on the connector. Only problem is the holders dont seem to fit very well. The templates or w/e hold the speaker in
GTcars Regular
Joined: Mar 2005
Posts: 1,053
From: Western suburbs of Chicago
Rep Power: 790
You need to buy a crimping tool at the store. A coupe of bucks. Thread the wire into the end of the new connector, crimp the wire/connector to hold it in the connector. The tool should be color coded to the size connector you are using.