Plug Wires
03-07-2006, 10:12 PM
#1
GTcars - Post God !
Thread Starter
Join Date: Apr 2005
Location: Holmen, WI
Posts: 16,092
Rep Power: 1018 
Plug Wires
I know I made a thread about this before, but it got deleted...
Im going to be ordering my plug wires now, and I just wanted your guys help as to which you think would be the best choice... Ive done a little reading, I dont know a whole lot about them, but I get the general idea.
Ive narrowed it down to a couple choices, and I dont want to spend more than $50 including shipping (if needed) prefereably. I just want somthing aftermarket, but nothing worth more than the outcome will be.
MSD 8.0mm Heli-Core Wires - 3.8L V6 - $40.00
Taylor 8mm Spiro Pro Ignition Wire Set - 3.8L V6 Camaro/Firebird - $41.02
Lastly, but not preferred... Only if you guys really think its worth $20 more.
MSD 8.5mm SuperConductor Wires - 3.8L V6 Plug-End Boot Style: 90° - $60.50
MSD 8.5mm SuperConductor Wires - 3.8L V6 Plug-End Boot Style: Multi-Angle - $60.00
(Whats the diff between 90* and multi angle btw?)
The page for all the info on them is here if anyone cares: http://www.ftpp.net/V6Main.htm
TIA for the help guys.
Im going to be ordering my plug wires now, and I just wanted your guys help as to which you think would be the best choice... Ive done a little reading, I dont know a whole lot about them, but I get the general idea.
Ive narrowed it down to a couple choices, and I dont want to spend more than $50 including shipping (if needed) prefereably. I just want somthing aftermarket, but nothing worth more than the outcome will be.
MSD 8.0mm Heli-Core Wires - 3.8L V6 - $40.00
Taylor 8mm Spiro Pro Ignition Wire Set - 3.8L V6 Camaro/Firebird - $41.02
Lastly, but not preferred... Only if you guys really think its worth $20 more.
MSD 8.5mm SuperConductor Wires - 3.8L V6 Plug-End Boot Style: 90° - $60.50
MSD 8.5mm SuperConductor Wires - 3.8L V6 Plug-End Boot Style: Multi-Angle - $60.00
(Whats the diff between 90* and multi angle btw?)
The page for all the info on them is here if anyone cares: http://www.ftpp.net/V6Main.htm
TIA for the help guys.
03-07-2006, 11:39 PM
#4
GTcars - Post God !
Thread Starter
Join Date: Apr 2005
Location: Holmen, WI
Posts: 16,092
Rep Power: 1018
Well I was talking to Josh from there, and he said he doenst usually keep Taylor in stock, and it would take a couple weeks to get them + more to ship them.. and i need them by the end of the month. Taylor are the ones I originally wanted... So I looked elsewhere... Do these look like the same ones as on ftpp? http://www.carjunky.com/shop_cj/bdn/...f8edde01c.html
03-12-2006, 08:53 PM
#6
GTcars - Post God !
Thread Starter
Join Date: Apr 2005
Location: Holmen, WI
Posts: 16,092
Rep Power: 1018
I was looking at my header install sheet the other day, and it recommended getting the 45* angle ones for more clearance... What do you guys think?
I wanted to get the Taylors, they are described as 90*... Do you think Ill be alright?
I wanted to get the Taylors, they are described as 90*... Do you think Ill be alright?
Brand: Taylor Cable Products, Inc.
Product Line: Taylor Spiro-Pro Spark Plug Wire Sets
Assembled: Yes
Diameter (mm)VL: 8.00mm
RFI Suppression: Yes
Wire Color: Red
Distributor Plug Ends: Male/HEI
Spark Plug Boot Ends (degrees)VL: 90 degrees
Distributor Boot Color: Black
Distributor Boot Material: Silicone
Spark Plug Boot Color: Red
Spark Plug Boot Material: Silicone
Spark Plug Boot Ends: Six 90 degree
Coil Wire Included: No
Quantity: Sold as a set.
Product Line: Taylor Spiro-Pro Spark Plug Wire Sets
Assembled: Yes
Diameter (mm)VL: 8.00mm
RFI Suppression: Yes
Wire Color: Red
Distributor Plug Ends: Male/HEI
Spark Plug Boot Ends (degrees)VL: 90 degrees
Distributor Boot Color: Black
Distributor Boot Material: Silicone
Spark Plug Boot Color: Red
Spark Plug Boot Material: Silicone
Spark Plug Boot Ends: Six 90 degree
Coil Wire Included: No
Quantity: Sold as a set.
03-12-2006, 10:30 PM
#7
GTcars - Post God !
Join Date: Nov 2003
Location: Valencia, CA
Posts: 7,173
Rep Power: 892
well first off, 90* is obviously 90*...but the multi angle is straight and can be bended to different angles. only use it for 180* though, i wouldnt trust it bent.
and as for the wait on taylors...i got mine for carmen from thunderracing...only took a week.
but id actually recommend MSD Heli-Core. the taylors, as ive mentioned before, had a tendency to break off on the plugs. my MSDs on my Z didnt have that problem...they did however burn on headers a lot, but not much anyone can do about that, lol.
and as for the wait on taylors...i got mine for carmen from thunderracing...only took a week.
but id actually recommend MSD Heli-Core. the taylors, as ive mentioned before, had a tendency to break off on the plugs. my MSDs on my Z didnt have that problem...they did however burn on headers a lot, but not much anyone can do about that, lol.
03-13-2006, 12:36 AM
#8
GTcars - Post God !
Thread Starter
Join Date: Apr 2005
Location: Holmen, WI
Posts: 16,092
Rep Power: 1018
Originally Posted by NoRiceInside
but id actually recommend MSD Heli-Core. the taylors, as ive mentioned before, had a tendency to break off on the plugs. my MSDs on my Z didnt have that problem...they did however burn on headers a lot, but not much anyone can do about that, lol.
Thread
Thread Starter
Forum
Replies
Last Post
MarcheeGSR
Car Parts For Sale
0
09-25-2005 01:59 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)