Rep Power: 674

Just wondering if any of you have suggestions on a certain brand or brands. Links would be nice too

Another question, I believe I've asked it before, but how hard would it be to swap in a 6spd and a GENERAL price? I'm not looking for specifics...just a general idea (autos get soo boring)

 
Rep Power: 670

yea auto is gay im lookin at doing a t-5 swap in my 91 z

 
Rep Power: 674

I just get really bored with it...that and I need a new tranny kinda soon anyways....

 
Rep Power: 886

Well it depends on what year car you have. I'm assuming its a V8 since you want a 6spd. As far as doing a swap there is more than just unbolting and bolting in the new one. You are going to need all the clutch components, pedals and such. I'm not sure but I think you are going to need a different crossmember as well. Quite a bit of work.

 
Rep Power: 674

It's a 94. Yeah I figured I'd need all that...hawksthirdgen has the clutch assembly. Do you know of any write ups that have to do with the swap?

 
Rep Power: 935

Yea I was going to do a swap on my formula, But It was way way too much for all the **** you need. I went with a stage 3 with a bigger stall.

 
Rep Power: 674

stage 3 tranny?

 
Rep Power: 935

I got it from a preformance shop, they classifed it as a stage 3 out of what they sell. Its built up with more high performance internals, shift kit, bigger stall etc etc.

 
Rep Power: 674

Ok, I'm retarded...what's the stall converter do? ...I don't know much about auto's...

And thanks for all the info, you've been helping quite a bit

 
Rep Power: 935

Stall is the speed at which the converter will hold the engine speed and not allow any further gain in RPM. if you go WOT with your wheels locked, the engine would not go any further in RPM then the stall speed at which point it would either stall/die or just lug out at that RPM, unti you release the brakes. The Stall speed rating or number on your converter is the RPM at which the power transfer is most efficient. Below the Stall Speed - lots of slip - at and above the stall speed - near lock transfer.

 
Rep Power: 674

what would be a good stall speed to have then, and out of curiosity how much was the tranny?

 
Rep Power: 935

I previously had a 3600 stall and it was soo much, around the 3000 range is what I have found to be perfect for normal driving and a little more fun to go. I paid around 2k give of take for the tranny and everything I added on to it.

 
Rep Power: 674

Oh ok, so kinda the lower the better. Does it make it accelerate faster/torquey-er?

Was the tranny brand new or did they rebuild it?

sorry for pickin your brain so much

 
Rep Power: 935

No lower is not better, Higher is better. You want to go with atleast a 2800-3000 stall 3600 would be the highest I would go. I had a 3600 previously and it was fun as **** but wasnt good for slow cruising around the town and definatly hurt my mpg.

The tranny was a rebuilt core the place I got it from gets used ones and rebuilds them.

 
Rep Power: 674

Ohhhh ok.. I totally misunderstood that, thanks lol.