Rep Power: 1093

Ok, so I was drving to work today, and when I went to put my left blinker on, the little green arrow just stayed on solid and didnt make any noise. When I got to work I saw that my front daytime running light was out on the left side, and my rear turn signal stays on solid just like inside the car. I cleaned out my engine today by spraying it, i think that was a dumb idea, maybe that had something to do with it... is it a short, or burnt out bulb, or what. I need help guys, thanks!!!

 
Rep Power: 839

Replace the bulb in the taillight for the turn signal

 
Rep Power: 1125

spraying the engine shouldn't do that, but water may have gotten in teh light socket, if the bulb was burnt out it wouldn't stay lit outside

 
Rep Power: 794

same thing happend to me , just like 3 days ago, should just be the bulb.

 
Rep Power: 1093

The front left bulb? I dont think I would need to replace the rear bulb if its still lit?

I dont know if I was clear, but my front left signal and light does not come on. I think its burnt out. My rear left turn signal stays lit, and doesnt blink; it just stays solid. And inside my car, when I put the left signal on, the green arrow stays solid and doenst blink, or make any noise. It's odd, but hopefully someone knows exactly whats going on. Thanks much guys, I really appreciate it!

 
Rep Power: 794

thats the same thing that happend to me, when i put on the left turn signal it would just stay green, but the right one worked. And thats wht happend also, the front wouldnt come on, and neither would teh back, after we replaced the front one it workd

 
Rep Power: 839

I read it wrong. Replace the front one.

 
Rep Power: 1125

does the rear light stay on if the switch is off? if so it's a short, if not then the front bulb is junk

 
Rep Power: 1093

Yeah thats where I got confused guys... I'm sure its the bulb. I thought about that first, but I didnt know if that was for sure it or not. Someone at my work said that its just the front bulb. It's like its telling me that the system wont work because a bulb is out. So it's just the front bulb. I just thought something was all messed up because I sprayed out the engine, and I usually refrain from doing that because I heard it can damage some parts. Anyways, I'll be switching out the front bulb tomorrow probably. Thanks for the help guys.

 
Rep Power: 1093

btw... I was just browing for the sticky that has the bulb numbers, and I couldnt find it. Anyone have the link? Thanks

 
Rep Power: 1125

if spraying the engine bay hurt things then driving in the rain would too, all the electrical is weather sealed, and if you leave teh engine running you won't have any problems

 
Rep Power: 860

Chevy probably made it all mess up when the lights out just to make sure you fix it asap or something... or they are just ********? lol

 
Rep Power: 1093

The engine should be left running when you spray it? I didnt know that, thanks!

 
Rep Power: 1125

I always do, unless steam claening and it's going to sit

 
Rep Power: 1125

most cars are done like that so you can tell it's out (since few people have safety inspections done)