Stall
GTcars - Post God !
Joined: Dec 2004
Posts: 7,679
From: Everywhere
Rep Power: 935 
I have the --TCS S3 Series 9/11 3600 stall converter w/ lock up
"All TCS Performance Torque Converters include a furnace brazed Pump Cover, double reinforced Turbin Fins, a 4340 Billet Turbin Spline, Torington Bearings & a 4130 induction heat treated Pump Drive Hub."
It woke the car up alot.
"All TCS Performance Torque Converters include a furnace brazed Pump Cover, double reinforced Turbin Fins, a 4340 Billet Turbin Spline, Torington Bearings & a 4130 induction heat treated Pump Drive Hub."
It woke the car up alot.
~~ Hardcore Newb ~~
Joined: Nov 2005
Posts: 9
From: Philly
Rep Power: 0
3000 ...if you get a nice brand it isnt too much of a difference till you stomp on it 
It is one of the biggest sit of the pants mods though. Make sure you do a tranny cooler and temp guage though cause you can kill the tranny if your not careful.
It is one of the biggest sit of the pants mods though. Make sure you do a tranny cooler and temp guage though cause you can kill the tranny if your not careful.
GTcars - Post God !
Joined: Apr 2004
Posts: 15,868
From: Saraland AL
Rep Power: 1126
Originally Posted by FORCE_FED_Z
It all depends on the application- if you cruise around a lot, get the lower one, or else you might in the convertor quite a bit...
Thread Starter
Skilled GTcars Poster
Joined: Oct 2004
Posts: 786
From: Papillion, NE
Rep Power: 805
Originally Posted by archemedes
worlds best advice on a converter. You put the wrong one in and it will feel like you lost a cylinder, or burn up your trans from slipping (makes more heat)
Two ppl I know who had pretty quick f-bodies (one bolt on LT1 in the 12s and the other in the low 13s I think) one in the 12s had a 3,500 stall converter street driven and the other like 3,200 they absolutely said I should go higher. I am getting a transmission cooler and a shift kit I just don't see how it would feel like I lost a cylinder if it gets my car closer to low 13s.. never had a higher stall converter before so I'd like to know.
GTcars - Post God !
Joined: Apr 2004
Posts: 15,868
From: Saraland AL
Rep Power: 1126
what it does is slips to get the engine to rev higher, so the engine gets to a higher rpm band, and may not stay in the best part for power. Call TCI and see what they say, they know better than anyone since they build them and test them constantly
~~ Hardcore Newb ~~
Joined: Nov 2005
Posts: 9
From: Philly
Rep Power: 0
3000 should be fine if its a good brand converter...cheap ones tend to act funny. Basically your car might feel slower because at low rpms your car isnt really gonna want to move as much as before... But you will love when you got WOT it makes a big difference especially when it shifts and stays more in the powerband. Bad thing is if your tranny has any problems it will hasten the destruction of it lol. Id get a b&m cooler 24000 gvw.
