system is in (pics)
#1
system is in (pics)
I believe this is a unique position for the solenoids. The feed line comes up from underneath. The solenoids are a tight fit in there but the wrap around the condensor perfectlly. The top of the solenoids just barely touch the plastic of the battery but they dont come anywhere the connection (just gotta be careful taking the battery wire on and off). It took me a while to get the full throttle switch bent just right, but it seems to be working just fine. The delivery line will come straight up from the top solenoid and bend straight towards the intake. Its a perfect fit.
http://www.thenebula.com/carpics/pics4/nostop.JPG
http://www.thenebula.com/carpics/pics4/nosangle.JPG
http://www.thenebula.com/carpics/pics4/nosangle2.JPG
http://www.thenebula.com/carpics/pics4/nostop.JPG
http://www.thenebula.com/carpics/pics4/nosangle.JPG
http://www.thenebula.com/carpics/pics4/nosangle2.JPG
#3
repainting the bottle
start with this
sand down the rough spots and smooth it all out
75 grit to 320 grit
degrease/clean/spray primer
sand out primer (400 grit) and spray basecoat
allow base to dry and spray clear
allow to dry for a couple of days, polish and glaze
start with this
sand down the rough spots and smooth it all out
75 grit to 320 grit
degrease/clean/spray primer
sand out primer (400 grit) and spray basecoat
allow base to dry and spray clear
allow to dry for a couple of days, polish and glaze
Thread
Thread Starter
Forum
Replies
Last Post
Skimmer
Honda Civic - Del Sol - CRX
2
01-06-2008 10:12 AM
Ron Jones
Honda Mailing List
1
02-20-2006 02:15 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)