GTcarz - Automotive forums for cars & trucks.

GTcarz - Automotive forums for cars & trucks. (https://www.gtcarz.com/)
-   General Automotive Chat (https://www.gtcarz.com/general-automotive-chat-29/)
-   -   and the results are in... (https://www.gtcarz.com/general-automotive-chat-29/results-106626/)

69z-28 07-09-2007 11:49 PM

and the results are in...
 
.................


326 RWHP
342 FT lb TQ

i forgot the RPM and all that but those are the numbers, the air fuel is DEAD on and the tuner (Dan Bills at FLP, rumored to be one of the best around) said the 125 shot will be no problem and with the cam specs and mods, i made great power. was also in 94* weather and not SAE corrected. the peak is just past 5,500 so the power range is incredibly useful, however i knew that before the dyno tune. o ya, the TQ curve..... well, that's all im gonna say about that. hehe

ill post the dyno chart in the next day or so after im feeling better from surgery.

Mike Jones 07-10-2007 12:04 AM

Not bad at all, I still really need to get mine on the dyno.

FLP has a Mustang dyno right?

ITSA6 07-10-2007 01:06 AM

wow awesome that's just awesome nice work

Mikerock 07-10-2007 03:11 AM

what was your afr????

A-RoN'sZ 07-10-2007 03:15 AM

Nice numbers man!

69z-28 07-10-2007 06:10 AM

ill have to check the exact a/f mike, but it was steady as a rock, ill post dyno chart and crap in a day or so.

and Chad, its actually a dynojet.

rice burner 07-10-2007 08:21 AM

how much did they charge to dyno it?

69z-28 07-10-2007 01:23 PM

normally 450 for a cammed LT1 but i talked to mitch and had already had a basic tune done about a year ago so they did it for 350.

FORCE_FED_Z 07-10-2007 04:02 PM

Decent numbers Matt- I'm assuming those are your N/A numbers correct?

And people who bash on the LT1's, yeah your LS1's might make more power, but at least out torque curves don't have much of a curve...I love how flat mine was- from 3000 rpm all the way up.

The dyno that I have gone to charges by the hour- there is no base rate. Plus he only charges for when he is working on the car, the time he spends answering the phone and such he doesn't charge for. Its still $150 an hour, but you can get a lot done in that amount of time.

Karps TA 07-10-2007 04:07 PM

Nice numbers. Do you have any track times?

69z-28 07-10-2007 06:49 PM

ya Joe N/A, so im thinking with a 125 shot ill be just shy of 450 at the wheels, which should be an 11 for sure if i can cut any decent 60'.

Karp, the car went 13.3 at 105 with a 2.0 60'

and 13.1 at 111 with a 2.1 60' on a 75 shot.

FORCE_FED_Z 07-10-2007 08:09 PM

I'm thinkin you would be closer to around 430ish rwhp, you dont' necessarily get all 125 ponies.

But with that many horses at the helm, get a decent 60' and you should see 11's with your mph in the teens as well.

Karps TA 07-10-2007 08:11 PM


Originally Posted by 69z-28
ya Joe N/A, so im thinking with a 125 shot ill be just shy of 450 at the wheels, which should be an 11 for sure if i can cut any decent 60'.

Karp, the car went 13.3 at 105 with a 2.0 60'

and 13.1 at 111 with a 2.1 60' on a 75 shot.

Cool. Was curious, I dyno'd pretty close to that last fall. However when I ran the other weekend my times were not what they should be, although it was pretty hot.

paarman97maro 07-11-2007 04:49 PM

nice numeros cocktard

Mikerock 07-12-2007 02:09 AM

sooooo afr??? 13:1??


All times are GMT -4. The time now is 03:17 AM.


© 2024 MH Sub I, LLC dba Internet Brands

Page generated in 0.05512 seconds with 5 queries